313 Acrylic Floor Paint is a quick drying, single pack, water based acrylic floor paint for foot traffic and occasional vehicle use.

For use on tarmac, concrete, asphalt, wood, walls, window ledges, bricks or metals. For internal or external use.

313 Acrylic Floor Paint is suitable for foot and light truck traffic use.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Typical Properties
• Coverage
• Surface Preparation
• Application
• Cleaning
• Curing
• Storage & Shelf Life
• Health & Safety

Features & Benefits

• Ready mixed
• Semi-gloss finish
• Quick Drying
• For use on tarmac, concrete, asphalt, wood, walls, window ledges, bricks or metals
• Touch dry in just 1.5 hours @ 20 °C
• Low odour
• For internal or external use

Typical Properties

Coverage

• Expected spreading rate of 11m²/litre at 30 microns dry film thickness.
• The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application

Surface Preparation

• All surfaces should be clean, dry, sound and free from contaminants
• Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint
• This can be done mechanically by abrading or blasting, or chemically using Acid Etch
• These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance
• New concrete must be allowed to cure thoroughly which can take up to 3 months
• Other surfaces must be prepared and primed with the suitable primer for that substrate
• Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced
• Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly

Mixing:

• Mix well before use

Priming:

• Apply direct to wood, suitable metals primer on metal, Acrylic Floor Paint thinned 5% with clean water on all other unpainted surfaces

Application

• As dictated by normal good painting practice
• Do not apply if the temperature is likely to drop below 7 °C during application or during the drying process
• In confined spaces, provide adequate ventilation during application and drying

Cleaning

• Water

Curing

Low temperature and high humidity will adversely affect application, drying and performance of any coating.

Storage & Shelf Life

• Store in closed original container at temperatures between 5°C and 25°C
• Keep away from heat, sparks and open flame
• Keep containers upright
• See section 7.2 of the Safety Data Sheet for further information

Health & Safety

• Please refer to Material Safety Data Sheet for information
• 313 Acrylic Floor Paint shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]