• 303 WG Epoxy Floor Paint

    303 WG Epoxy Floor Paint

    RAW303WG
    RAW1214

    303 WG Epoxy Floor Paint is a fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required.

    • Fast curing even at lower temperatures
    • May be applied to dry or damp surfaces
    • Also available in 4,000+ colours from NCS, RAL, BS
    • Available in Smooth and Anti-Slip* options
    • Low odour
    • Easily applied
    • Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis & many solvents
    • Very good adhesion to concrete
    • Slip resistant options
    • Images are for illustrative purposes only & may differ from the actual product
    • This product is for Professional Use Only

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
      Your customization:
    Colour Group
    Size
    Finish
    Option
    £96.00(ex. VAT)
    £115.20 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    303 WG Epoxy Floor Paint is a fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required. 303 WG Epoxy Floor Paint is user and environmentally friendly, containing no solvents and is very low odour during application.

    303 WG Epoxy Floor Paint may be easily applied by brush, roller or airless spray, to provide a decorative, abrasion and chemically resistant coating of excellent durability. It leaves a smooth satin finish when dry.

    Anti-slip properties of the coating can be enhanced by the addition of 508 Fine Particle Anti-Slip Additive can be added to the coating (200g per 5kg of 303 WG Epoxy Floor Paint) during mixing prior to application to produce an even and easily cleanable texture to the dried surface.

    Note: For our ultimate slip resistance see 502 HD Anti-Slip Coating.

    This product is for Professional Use Only.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Fast curing even at lower temperatures
    • High performance
    • Water dispersible
    • Contains no solvents
    • May be applied to dry or damp surfaces
    • Available in a wide range of colours
    • Low odour
    • Semi-Gloss finish
    • Easily applied
    • Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents
    • Very good adhesion to concrete
    • Hygienic and easily cleaned
    • Slip resistant options
    • Suitable for use as a floor covering in food factories, abattoirs, dairies, laboratories, warehouses, etc.
    • Can also be used as a chemically resistant coating for bund areas
    • A hygienic, easily cleanable surface on walls, ceilings etc.
    • Ideal where a fast return to service is required or when application must be carried out in lower temperatures



    Typical Properties


    Technical Data
     303 Epoxy Floor Paint
    Pot life @ 20°C:60 Minutes
    Pot life @ 10°C:120 Minutes
    Application Temperatures: Min. 3°C Max. 30°C
    Coverage: 0.20-0.25kg/m²/coat
    Volume Solids:65%
    Finish: Semi-Gloss



    Chemical Resistance
    ChemicalResistance
    WaterExcellent
    Dilute Acids and AlkalisExcellent
    Glycol EthersExcellent
    Dibasic Ester SolventExcellent
    SkydrolExcellent



    Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



    Slip Resistance


    Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface.

    Alternatively the 'Anti Slip' option can be selected when purchasing the product and the 250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt.

    • 5kg unit - add 200g
    • 15kg unit - add 600g

    The above recommendation must only be used as a general guideline as the slip resistance of a cured resin coating can vary considerably due to many factors including: application technique, variations in film thickness, dispersion of the anti-slip texturing additive and the surface variations of the substrate and location to where it will be applied.

    To obtain accurate PTV readings that are site specific (if required) it is strongly recommended that a slip assessment pendulum test is undertaken on each specific site after completion of the installation when the resin has fully cured.



    Coverage


    • A 5kg pack is sufficient to treat 10.0-12.5 m² of surface with the recommended two coat treatment, providing an overall d.f.t. of 200-250 microns (15kg pack pro rata)



    Surface Preparation


    Concrete:

    • Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%
    • Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes
    • Smooth concrete, or concrete with soft laitance, shall be mechanically treated by diamond grinding or grit blasting to provide a clean profiled surface
    • Should this not be practicable then acid etching, although less preferable, is also an option
    • Blow holes and defective concrete shall be made good using 201 Epoxy Repair Mortar
    • Suitable mechanical treatment, such as vacuum grit blasting, is recommended to ensure a clean, uncontaminated substrate



    Metal:

    • Metal surfaces shall be wire brushed or power disced to remove any rust and loose or flaking material
    • Grit blasting is recommended, where practical, for optimum performance
    • Surface should then be immediately coated after preparation with 404 Epoxy Metal Primer



    Wood:

    • Wood surfaces shall be sanded to a smooth finish, and all previous coating removed
    • Previously untreated wood shall be sealed with a coat of 401 Epoxy Floor Primer or 402 Damp Proof Coating

    Note: Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers. Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full details.

    303 WG Epoxy Floor Paint will not tolerate movement in the substrate, if there is a possibility the substrate may flex, expand and contract, shift etc. use one of our flexible coatings - Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



    Priming:

    • A primer coat of 401 Epoxy Floor Primer is recommended on concrete substrates
    • This will facilitate application to damp and/or absorbent surfaces
    • Apply the 401 Epoxy Floor Primer at a nominal rate of 0.2kg per m² in accordance with the product data sheet instructions
    • Allow the primer to cure for a minimum period of 2 hours @ 20°C
    • Ensure good ventilation during the drying/curing period



    Mixing:

    • Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means until a uniform consistency is achieved
    • The mixed material may be thinned by the addition of up to a maximum of 10% by volume of clean, potable water



    Mixing Ratio:

    • By Volume = 1 Base : 2.6 Curing Agent



    Application


    • Apply by brush, roller or airless spray at a nominal rate of 0.20 to 0.25kg/sq.m. per coat equivalent to a dry film thickness of 100-125 microns
    • A minimum two coat treatment is recommended, applying subsequent coats after a minimum interval of 3 hours cure at 20°C
    • Ensure good ventilation after application, as this speeds up the physical drying stage of the curing process
    • Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface
    • Alternatively for a more aggressive anti-slip finish 504 Standard Anti Slip Aggregate can be scattered onto the first coat of 303 WG Epoxy Floor Paint whilst still wet
    • The following day any excess aggregate may be swept from the surface using a clean brush prior to application of the second coat



    Cleaning




    Curing


    • Allow to cure for a minimum of 3 hours @ 20°C prior to light foot traffic access and 8 hours @ 20°C prior to vehicular trafficking
    • 7 days cure @ 20°C is recommended prior to exposure to chemicals
    • Good ventilation is essential for satisfactory curing of the coating
    • Lower temperatures will extend the curing time



    Limitations


    • Do not apply to wet or uncured concrete surfaces
    • Do not apply at temperatures of 3°C or less
    • In poorly ventilated areas forced extraction must be provided



    Storage & Shelf Life


    • Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C
    • 303 WG Epoxy Floor Paint has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions



    Health & Safety


    • Avoid contact of the material with skin and eyes
    • Wear gloves and goggles
    • Wash off splashes immediately with soap and water
    • Any eye contamination must be rapidly irrigated with copious amounts of water, and immediate medical attention sought
    • Please refer to Material Safety Data Sheet for additional Information
    • 303 WG Epoxy Floor Paint shall be applied strictly in accordance with the manufacturer’s instructions

    For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



    Product Details
    1214-916758

    Data sheet

    For Use By
    Professional Use
    Interior / Exterior Use
    Interior Use
    For Use On
    Concrete, Metal, Wood
    Application Method
    Brush, Roller, Spray
    Sheen
    Satin, Matt, Gloss
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    5KG, 15KG
    Minimum Applied Thickness
    100 microns
    Maximum Applied Thickness
    125 microns
    Coverage
    4m² per KG
    Min. Application Temperature
    +3°C
    Min. Application Temperature
    3°C
    Touch Dry
    3 Hours
    Resistance to chemicals
    Water, Dilute Acids, Dilute Alkalis, Gycol Ethers, Dibasic Ester Solvent, Skydrol
    Base Type
    Water-Based
    Suitable For Use On
    Metal
    Suitable For Use On
    Wood
    Suitable For Use On
    Timber
    Suitable For Use On
    Concrete
    Finish
    Satin
    Finish
    Matt
    Finish
    Gloss
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Components
    2K
    Usages
    Winter Grade
    Usages
    Low Temperature
    Product Usage Type
    Topcoat
    Product Category
    Paints
    Colour Family
    Grey
    Colour Family
    Blue
    Colour Family
    Yellow
    Colour Family
    White
    Colour Family
    Green
    Colour Family
    Red
    Colour Family
    Black
    Anti-Slip Texture
    Fine Texture
    Categorised As
    Floor Paints > Low Temperature Anti-Slip Floor Paints
    Categorised As
    Floor Paints > Low Temperature Floor Paints
    Seasonal
    Cold Weather
    Product Type
    Epoxy
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions brian Maczka on 2019-11-22 14:34:05
    Question: 

    1. when can foot traffic resume after application of 303 WG Epoxy Floor Paint? 2. Is a primer coat required? Thanks Brian

    Answer from Rawlins’ Technical Team: 

    Allow to cure for a minimum of 3 hours @ 20°C prior to light foot traffic access and 8 hours @ 20°C prior to vehicular trafficking. 7 days cure @ 20°C is recommended prior to exposure to chemicals. Good ventilation is essential for satisfactory curing of the coating. Lower temperatures will extend the curing time.

    A primer coat of 401 WG Epoxy Floor Primer is recommended on concrete substrates. This will facilitate application to damp and/or absorbent surfaces. Apply the 401 WG Epoxy Floor Primer at a nominal rate of 0.2kg per m² in accordance with the product data sheet instructions. Allow the primer to cure for a minimum period of 2 hours @ 20°C. Ensure good ventilation during the drying/curing period.

    questions Paul Coomber on 2019-08-13 14:40:11
    Question: 

    Is 303 WG Epoxy Floor Paint compatible for painting over mastic joints?

    Answer from Rawlins’ Technical Team: 

    No it doesn’t have the flexibility for this. We recommend taping over the joints and only painting up the edge.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    303 WG Epoxy Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    201 Epoxy Repair Mortar

    201 Epoxy Repair Mortar is a high strength, trowel applied, two component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.Pre-packed units – ready to use Fast curing Impact and abrasion resistant Frost resistant and impervious to water Negligible shrinkage Images are for illustrative...

    Price £36.00 (ex. VAT)
    In Stock and Available for Delivery

    401 Epoxy Floor Primer

    401 Epoxy Floor Primer is a two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Ideal for use as a clear sealer on concrete and masonry surfaces.Also available in 4,000+ colours from RAL, BS, NCSSee...

    Price £70.00 (ex. VAT)
    In Stock and Available for Delivery

    404 Epoxy Metal Primer

    404 Epoxy Metal Primer is a two pack, water-based, epoxy, anti-corrosive primer designed for the protection of steelwork.Non toxic Fast drying - touch dry in 1-2 hours @ 20ºC  May be applied to damp or dry surfaces Excellent anti-corrosive properties Compatible with a wide range of top coats Long overcoating window Easily applied...

    Price £37.60 (ex. VAT)
    In Stock and Available for Delivery

    502 HD Anti Slip Coating

    A 3-pack solvent-free high-build epoxy resin system in 10 colours for application as a heavy duty non-slip floor coating for concrete, metal and wood surfaces requiring high levels of slip resistance.Ideal for use in high traffic areas requiring high slip resistance such floors, stairs, ramps, loading bays Also suitable for chemical plant...

    Price £89.00 (ex. VAT)
    In Stock and Available for Delivery

    504 Standard Anti Slip Aggregate

    504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety.Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...

    Price £8.00 (ex. VAT)
    In Stock and Available for Delivery

    508 Fine Particle Anti-Slip Additive

    508 Fine Particle Anti-Slip Additive is a micronized polymer bead ideal for providing a measure of slip resistance when added to coatings and sealers.Available in 3 grades125 micron 250 micron 500 micronNon-Toxic Controlled particle distribution gives uniform finish Easily incorporated to most coatings and sealers Economical...

    Price £20.00 (ex. VAT)
    In Stock and Available for Delivery

    109 Tool Cleaner

    109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual productMore...

    Price £44.00 (ex. VAT)
    In Stock and Available for Delivery

    402 Damp Proof Coating

    402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes.Also available in 4,000+ colour options from RAL, BS and NCSPlease see 402 Damp...

    Price £100.00 (ex. VAT)
    In Stock and Available for Delivery