- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend Zinsser B-I-N as a great alternative.
Description
We no longer stock this product, but can recommend Zinsser B-I-N as a great alternative.
Mathys Pegaprim Isofix
Mathys Pegaprim Isofix is the ultimate adhesion primer. It is 100% white pigmented shellac, Pegaprim Isofix blocks the worst stains, seals in the toughest odours and bonds tightly to glossy and dense surfaces. Mathys Pegaprim Isofix seals in knots and sap streaks, grease stains, fire odour, and seals new wood. It’s great as a general primer and as a spot primer. No other primer performs as effectively or dries and cures as quickly as Pegaprim Isofix.
Features & Benefits
- Very fast drying
- Closed, good adhering paint film
- Masks odours
- Recoatable with most water and solvent borne decorative paints
- Can be applied at freezing temperatures
Premier Stain Killer
- Water stains
- Graffiti
- Knots
- Severe Smoke and Fire Damage
- Rust
- Food/Beverage
- Soot
- Interior Cedar/Redwood bleed
Best Odour Sealer
- Fire Damage
- Musty mould and mildew
- Pet odours
- Moth balls
- Fireplace odours
- Nicotine
Best Spot Primer
- Filler repairs
- Knots
- Bare wood
- Greasy, oily areas
- Make-up
- Ink, crayon stains
Best Over/Under Glossy Paints
- Kitchen cabinets Trim & doors
- Shelving
- Panelling
- Bare wood
- Tile
- Varnished trim
- Metal
- Formica®
Technical Data
- Density: ± 1,2
- Gloss Level: Satin
- Gloss level at 60º: Satin: ± 10%
- Solids content in volume: ± 30 %
- Solids Content in weight: ± 54 %
Drying Times At 20°C/RH 50%
- Touch dry: 15 minutes
- Dry to recoat: 45 minutes
- Fully cured: 1 day
Theoretical Consumption
± 10 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
The substrate should be clean, dry and stable. If necessary, degrease. Contamination has to be removed as thoroughly as possible. Strongly solvent borne topcoats must be tested for their tolerance first (e.g. polyurethane, epoxy).
Directions For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Application Conditions
> -1°C, < 80% R.H.
Application Methods
- Roller: Apply undiluted.
- Airless Spray: Nozzle: 0,015 inch / Pressure: 150 - 200 bar
- Air-Atomised Spray: Dilute with ± 2% volume denaturised alcohol
Remarks
In case of too fast evaporation or spraying, add ± 2% volume denaturised alcohol.
Product Details
3290.1
Data sheet
- Interior / Exterior Use
- Interior and Exterior
- For Use On
- Metal, Tile, Wood
- Application Method
- Roller, Spray
- Sheen
- Satin
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 5L
- Interior/Exterior Use
- Interior and Exterior
- Application
- Roller, Spray
- Dry to Recoat (at 20°C)
- 45 minutes
- Fully Cured (at 20°C)
- 1 days
- Coverage
- 10m² per litre
- Min. Application Temperature
- -1°C
- Density
- ± 1,2
- Solids by Volume
- ± 30 %
- VOC
- 480 g/l
- Shelf Life (from date of manufacture)
- 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 15 Mins
- Recommended Dry Film Thickness
- 30 µm
- Recommended Wet Film Thickness
- 100 µm
- UN Number
- UN1263
- Brand
- Mathys
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mathys Pegaprim Isofix is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT