Bollom Broflame Ultra Basecoat is a decorative, thin film intumescent base coat that delivers a Class 0 rating over solid timber and particle boards when used in conjunction with Bollom Flameguard Ultra Topcoats.
Bollom Broflame Ultra Basecoat
Bollom Broflame Ultra Basecoat is ideal for all types of interior timber in communal areas.
Together with one of the Bollom Flameguard Ultra Topcoats this system provides a means of achieving your desired colour scheme and finish, whilst providing Class 0 on the painted surface. The paints are designed to inhibit surface spread of flame and heat release, providing vital escape time in the event of a fire.
NOTE:It is important to speak to our Technical Department and refer to the product data sheet prior to using this product to ensure the correct specification has been chosen for your surface.
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Treat any knots. Scrape off any old or flaking paint until you have a firm well adhered surface; if in doubt remove all existing coatings. For existing gloss and eggshell finishes wet abrade and rinse with clean water to remove any residues.
To obtain the completed certificates for a project customers should email [email protected] with the following details:
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Andrew Thomas on 2023-11-10 14:30:16 | Question: Under the new holiday home regulations we have to create a 30 min fire protected escape route in a 2 storey cottage. We intend using Broflame ultra on the timber doors and frames. How many coats of base and top coat to achieve 30 mins. Incidentally the walls are either solid granite or plasterboard stud. |
Answer from Rawlins’ Technical Team: This product will only achieve a Class 0 fire protection rating to BS476: Parts 6 and 7. We have e-mailed seperately to request more information in order to assist with a 30min timed rating requirement. | |
| pete duffy on 2018-11-13 16:24:22 | Question: We are currently carrying out a shop fit using 18mm MDF fixed to 75 x 50 CLS timber studding The finish IS lining paper, then 2 coats of washable white matt emulsion Building Inspector said he would accept am intumescent paint What do you recommend Doors and door frames are FD30 |
Answer from Rawlins’ Technical Team: Could you confirm the level of fire protection you are being asked to achieve on the MDF please? This is extremely important to ensure we provide the correct advice/product. Also, do you know how many square metres there will be to paint? | |
Bollom Broflame Ultra Basecoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood and Bollom Brosteel Ultra 60Hard wearing vinyl matt finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS...
£83.88 (incl. VAT)
£69.90 (ex. VAT)
A primer/undercoat for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces.Excellent adhesion Seals porous surfacesMore Info View Similar Products Delivery Info
£92.30 (incl. VAT)
£76.92 (ex. VAT)
Bollom Flameguard Ultra Acrylic Eggshell is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 for steel. ADVANTAGESHard wearing eggshell finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces Available in 4,400+ colours, inc....
£92.70 (incl. VAT)
£77.25 (ex. VAT)
Bollom Flameguard Ultra Gloss is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, also Bollom Brosteel Ultra 60 for steel.Hard wearing gloss finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS...
£41.86 (incl. VAT)
£34.88 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
