Zinsser AllCoat Commercial (Water-Based) (formerly Zinsser AllCoat Interior (Water-Based)) is a multi-surface primer, sealer and finish for interior applications. It is perfect for large commercial environments and ideally suited to airless spraying. One coat is all that is needed to cover and seal most surfaces.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Zinsser AllCoat Commercial (Water-Based) (formerly Zinsser AllCoat Interior (Water-Based)) is a multi-surface primer, sealer and finish for interior applications. It is perfect for large commercial environments and ideally suited to airless spraying. One coat is all that is needed to cover and seal most surfaces.
AllCoat Commercial (Water-Based) is a great underbody for enamel topcoats, it resists grain rise allowing a smooth flow that levels evenly. It can be sanded down to a crisp powder within 1 hour. Zinsser AllCoat (Water Based) is ideal for large commercial wall and ceiling applications as it is self sealing and dries with very low odour. It is ideally suited to spray application and is widely used to refurbish suspended ceiling tiles and frames in environments such as supermarkets and car showrooms.
Features & Benefits
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Peter jefferies on 2024-01-28 13:58:50 | Question: Will it cover wall cladding polypropylene plastic sheets |
Answer from Rawlins’ Technical Team: No, unfortunately we do not have a product we can recommend for this application. | |
| Katharine on 2023-06-07 13:02:07 | Question: Hi, I am painting the interior of a garage which is finished to a second coat of plaster (a floating/levelling coat, not a setting/finishing/skim coat). I'm planning to use Zinsser AllCoat Water Based paint for this. Please can you tell me the coverage per litre that I can expect for this surface? Thanks! |
Answer from Rawlins’ Technical Team: The approximate coverage rate for this product is 10m² per litre per coat. | |
| Vanessa on 2022-07-15 08:51:46 | Question: I have walls previously painted with Zinder interior. In places where the paint has been removed I am finding it hard to sand the edge of the previously applied paint. It seems to lift slightly and resist so I just sand away the non Zinsser area if you see what I mean! Any suggestions welcomed! |
Answer from Rawlins’ Technical Team: Assuming the previously painted areas are clean, dry, sound and prepared as detailed in the technical data sheet you could consider Zinsser Peel Stop. This can be used on problem areas that exhibit chalking, alligatoring, cracking, flaking, and peeling. This penetrates and binds chalky residues, seals cracked or crazed surfaces providing a sound surface for primer and paint. It seeps into cracks and gaps under the edges of old paint and "glues" them down to prevent future peeling | |
| Derek kendal on 2020-04-30 07:37:06 | Question: What is the best product and finish for spray painting internal UPVC windows, and what size tin would I need for approx 12 average size windows. |
Answer from Rawlins’ Technical Team: Assuming the UPVC windows are aged, clean, dry and sound we can recommend Zinsser Allcoat Exterior Waterbased. This is available in matt, satin or gloss in many Ral and BS colours. If you require a matt finish you will need to prime with Zinsser Bulls Eye 1-2-3 prior to application. Coverage is 12m² per litre per coat. | |
| Arnas on 2019-11-07 07:06:24 | Question: Hi, Can I ONLY use Zinsser AllCoat Interior (water based) on my walls which are painted in Dulux Silk?! Or I would need something additional?! Thanks |
Answer from Rawlins’ Technical Team: Zinsser AllCoat Interior (Water-Based) offers tenacious adhesion over a wide range of surfaces that allows direct application over glossy paints. The superior priming and sealing properties of Zinsser AllCoat Interior (Water-Based) eliminate the need for a separate primer. | |
| Jamie on 2019-08-19 15:28:15 | Question: I will be straying a ceiling with this can you tell me the area that it covers? |
Answer from Rawlins’ Technical Team: Approximately 10m² per litre on sealed, non-porous surfaces. Very porous surfaces may require two coats. | |
| Miren Del Olmo on 2018-08-11 12:57:58 | Question: I'm looking for an interior paint to use on wooden clad ceilings, doors, balustrades and furniture all varnished and in good state, But I would prefer not to have to sand as it is a lot of surface to cover. It appears these multi surface paints may be the answer but I would appreciate your advice on whether the Zinsser Perma or this one would be better; although the house is not prone to mould. I am also just a bit unclear about the meaning of why this paint may need to be sanded off for a better finish? Many thanks Kind regards |
Answer from Rawlins’ Technical Team: We would always prime interior varnished surfaces with Zinsser B-I-N before applying Zinsser Perma-White or Zinsser AllCoat Exterior. Both are fine to go over Zinsser B-I-N. We're unsure where you have got the information on sanding the paint off to get a better finish, but you do not need to sand between coats when using the Zinsser products discussed. | |
| James on 2018-03-31 10:29:11 | Question: Would this seal a mahogany unit without the usual red bleed? |
Answer from Rawlins’ Technical Team: No, we would recommend using Zinsser B-I-N or Zinsser Cover Stain on interior hardwoods to block tannin bleed. If a water based stain block is required you could try Zinsser Bulls Eye 1-2-3 Plus, it may need several coats allowing a good few hours between each coat. Zinsser B-I-N or Zinsser Cover Stain however would always be more effective. | |
| mrs dhillon on 2015-08-31 13:43:53 | Question: Can I use Zinsser AllCoat (Water Based) on decking, hand rails, sheds and fence panels. |
Answer from Rawlins’ Technical Team: No, but you can use Zinsser AllCoat Exterior Satin on all those areas except decking. For decking try Jotun Demidekk Decking and Garden Stain. | |
| Sharon Eke on 2015-08-18 09:26:32 | Question: Does Zinsser AllCoat (Water Based) prime and finish as a topcoat to woodwork. |
Zinsser AllCoat Commercial (Water-Based) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Great for priming interior surfaces and spot priming exterior surfaces, formulated to seal, prime and block out stains on previously painted or new work and dries in minutes. For interior and spot exterior use Highly effective stain sealer Seals knots and sap streaks Permanently blocks odours Adheres to surfaces without sanding Dries...
£17.83 (incl. VAT)
£14.86 (ex. VAT)
The ultimate performance shellac-based primer-sealer and stain killer in 1,500+ colours for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.Permanently blocks odours Unparalleled adhesion to any surface without...
£31.93 (incl. VAT)
£26.61 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use.Kills and removes fungi, mould and algae growth Powerful fast acting formula Suitable for all interior surfaces Removes mould...
£8.40 (incl. VAT)
£7.00 (ex. VAT)
