New Revolutionary Technology
Brosteel Ultra 60 is a revolutionary new thin-film waterborne intumescent paint designed to provide 30 and 60 minutes fire resistance on standard structural steel members. Brosteel Ultra 60's water-based formulation is quick drying and does not require any specialist application skills - it can be applied by brush, roller or airless spray straight from the can! Brosteel Ultra 60 can also be overcoated with approved topcoats to provide a desired colour finish.
The Basics
What you really need to know...
- Protects steel from fire - 1 coat = 30 mins / 2 coats = 60 mins.
- Not to be applied onto bare steel, no special primer is required, just a suitable anti-corrosion primer.
- Leaves a matt white finish which can be left as a finish or overcoated with most good quality paints to give a decorative appearance and protection.
- Full certification is issued with every purchase.
- Fully tested and approved to British Standards.
- Can be applied with a roller, brush or spray gun.
- It works by expanding to protect the steel surface when a fire touches the surface. Creating a bubble that will last for 30 minutes or 60 minutes respectively.
Fire Protection Simplified
Brosteel Ultra 60 is designed to take the guesswork out of intumescent specification, the simplified formulation provides 30 minutes fire protection in only one coat - 60 minutes can be achieved in two coats.
Certification & Approval
Brosteel Ultra 60 Intumescent Paint for Structural Steel has been fully fire tested BS476:Part 20/21:1987 ASFP Approved, and Installation and Conformance Certificates are supplied with every purchase.
Advantages
• Simplicity - Simplified specification and simple application procedures.
• Cost effective - Due to its easy-to-apply, water-based formulation
• Brosteel Ultra 60 does not require any specialist application skills and can be applied by brush, roller or airless spray by any competent contractor.
• Certified - Certificates of Conformance and Installation are supplied with every purchase.
• Fully Tested - All of Bollom’s Intumescent Coatings for Structural Steel have been fully fire tested BS476:Part 20/21:1987 ASFP Approved.
NEW SIZES! Now available in 5 and 10 litre containers
Coverage: Dependant upon steel thickness and protection required.
Touch Dry: 2 hours
Application: Brush, Roller, Spray Disclaimer
Please download and carefully read product datasheets before application
|
