Fire Retardant Treatment
Non-toxic solution protects timber from fire and preserves appearance of wood
Fire Retardant Treatment is a fire retardant system which protects hardwoods, softwoods and other cellulose based substrates against fire and is available in a 20 Litre size.
Watch the video demonstration below to fully appreciate the flame retardant properties of this treatment.
Fire Retardant Treatment works by insulating the timber from heat, retarding ignition and stopping the flame from spreading across the surface.
By soaking into the surface and sealing the wood, Fire Retardant Treatment preserves the natural beauty of wood and can be overcoated with most good quality stains and varnishes.
This remarkable product will protect timber substrates to British Standard Class 0 certification standard, can be used internally and externally.
Fire Retardant Treatment can be applied to bare timber, is fully tested and approved to British Standards and a full certification is issued with every purchase.
Product Information
• British Standard Class 0 Fire Protection
• Lasts as long as the underlying timber
• Odourless and colourless
• Ecologically friendly solvent free
• Resists water and humidity
• Overcoatable using *certain products
• Suitable for interior/exterior use
Fire Retardant Treatment treated timber must only be used above the Damp Proof Course level and/or above ground contact. Trials should be carried out on decorative timber species to check any shade changes prior to the full application of the Treatment.
Coverage: 3.7m2 per litre
Touch Dry: 40 - 60 mins
Application: Brush, Roller, Spray Disclaimer
Please download and carefully read product datasheets before application
|
