Anglo Speed Patch Pourable Grade
Quick setting, pourable patch repairs for heavily trafficked floors.
A quick and easy way to fill holes in heavily used concrete floors inside or outside. No primer is required - just mix the powder with water and pour into the hole. This rapid setting concrete repair bonds to damp or dry surfaces and can be applied at thicknesses from feather edge to 100mm.
• Sets for foot traffic after 30 minutes
• and heavy traffic after 2 hours
Usage rate: 25kg covers 2.5m2 at 5mm thickness
Size available: 25kg
Surface Preparation:
Remove loose deposits, flaking paint and any contamination. Can be applied to a damp (not wet) substrate.
Mixing and Application:
Mix approx 150ml - 200ml of clean cold water with 1kg of powder to produce a pourable slurry. Mixing by hand using a spatula or similar wide blade reduces air in the mix and breaks up lumps. Adding too much water can weaken the mix. Once mixed the product starts to set very quickly, so use immediately and do not mix more than can be used within a few minutes. Do not re-stir - this can produce a weakened, crumbly mix. Pour slurry into the hole. It should self-level,
so trowelling is not generally required.
Curing:
Pedestrian Traffic: 30-60 minutes. Heavy/Forklift Traffic: 2 hours. The above assumes a temperature of 15OC or above. Curing time can be extended by low temperatures. As a guide allow 24 hours at 5OC.
Pot Life:
5 to 10 minutes at 20OC.
Cleaning Tools:
Use water before the product hardens. Disclaimer
Please download and carefully read product datasheets before application
|
