Rust-Oleum 9100 Epoxy System
High performance epoxy system for optimal protection in only one or two layers.
For concrete and metal - 2-Pack Solvent based
The most efficient epoxy system on the market!
Rust-Oleum High Performance System 9100 Topcoats are designed for application on manually prepared rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces. Rust-Oleum 9100 Topcoats are primarily intended for brush and airless spray application and can also be applied by roller.
Rust-Oleum 9100 Topcoats offer excellent protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and chemical cleaning; high humidity and moisture conditions. If good U.V. resistance is required Rust-Oleum Polyurethane Topcoats 9200, 9600 or 9900 should be applied (except for the clear coatings).
Rust-Oleum 9100 Topcoats can be applied on cleaned, sound mineral substrates, sound, well prepared previous coatings; porous substrates should be primed with Rust-Oleum Impregnation Primer 5401; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum Super Adhesive 3333.
• Easy mixing (1:1 ratio)
• For each surface and condition
• High build
• Minimal surface preparation
• Low VOC
• In almost any colour
• High build primer and finish in one
• For concrete and metal
• Very resistant to abrasion
• Suitable for frequent cleaning with chemicals
• Available as Standard, High Solids or Winter Grade (0 °C)
• 100-150 micron in a single layer
• Available in a number of standard colours
• Tintable in virtually any colour
• High performance epoxy system
• Surface tolerant primer
• Fast drying high build primers
• Self-priming coating
• Chemical resistant
• Winter grade & high solids activators available
9100:
• Coverage: 6m2 per litre
• Touch Dry: 6hrs @ 20°c
• Application: Brush, Roller, Spray
9100HS:
• Coverage: 7.3m2 per litre
• Touch Dry: 6hrs @ 20°c
• Application: Brush, Roller, Spray
9100WG:
• Coverage: 7m2 per litre
• Touch Dry: 8hrs @ 15°c
• Application: Brush, Roller, Spray
Choice from 3 activators:
9101 - Standard all-round activator ideal for most jobs
9101HS - For extra layer thickness and protection or when low VOC is important
9101WG - For application at temperatures down to 0 °C
Required primers:
Light rusted metal - 9169 Epoxy Rust primer
Bare metal - 9170/9180 Epoxy Metal primer
Smooth concrete - 3333 Epoxy Adhesion primer
The outdoor durability and chemical resistance of the system can be further improved by the application of an additional topcoat Rust-O-Thane 9200 or 9600. Disclaimer
Please download and carefully read product datasheets before application
|
