Anti Slip Tape
Self-adhesive anti slip surfaces for steps, ramps, floors, vehicles etc. Anglo Anti Slip Tape provides an instant anti slip surface for steps, ramps, floors, vehicles, boats etc.
Availability:
Anglo Anti-Slip Tapes are available in 18m x 50mm rolls in Yellow, White, Black, Hazard and Clear. Anglo Anti-slip Tape ’Aqua’ (White) is available for barefoot areas only such as showers, pool surrounds etc.
Surface Preparation:
The surface must be clean, dry and smooth.
Priming:
Anglo Anti-Slip Tape can be applied directly onto clean, smooth, non-porous surfaces. We recommend that Anglo Anti-Slip Primer is used to improve adhesion and durability on porous surfaces.
Application:
Apply at temperatures above 10ºC. Peel off backing strip and firm into place using foot pressure or soft rubber mallet. The tape can be walked on immediately but maximum adhesion is achieved after approximately 24 hours. Anglo Anti-Slip Edge Sealer is recommended in wet or heavy wear conditions (see below).
Limitations:
Anglo Anti-Slip Edge Sealer and Anglo Anti-Slip Primer are not recommended for use with Anglo Anti-Slip Tape ‘Aqua’. Disclaimer
Please download and carefully read product datasheets before application
|
