Rust-Oleum Mathys NS200 / NS300 Anti-Slip Additive
Turn a standard floor coating into an anti-slip coating
Rust-Oleum Non-Skid 200 & 300 Additives are intended to be added to floor coatings to produce a non-skid surface.
Rust-Oleum Non-Skid 200 & 300 Additives if broadcast/sprinkled into the freshly applied wet coating should be over coated to encapsulate the additive fully. A coat over the additive will also make cleaning of the finished floor surface significantly easier.
• Non-skid floor additive based on thermally split flint stones
• Formulated for use with 2-pack floor coatings
• Can be mixed into coating or broadcast over the final (wet) finish
• Produces a rough, non-skid surface
Particle size:
NS200: 0.2 – 0.5 mm
NS300: 0.5 - 1 mm
Coverage: 50gms per m2
Application: Sprinkle by hand or applicator, low pressure spraying equipment or the additive can be mixed thoroughly into the coating itself prior to use. Disclaimer
Please download and carefully read product datasheets before application
|
