Rust-Oleum 5090 Anti-Condensation Coating
Rust-Oleum 5090 Anti-Condensation Coating is a water absorbing coating based on a water-based acrylic polymer. The product contains a non-leaching fungicide to prevent mould growth.
• Water-based
• Recoatable after just 5 hours
• Application on slightly damp surfaces
• Ideal for high humidity areas (breweries, wash and shower rooms, etc.)
• Stops walls and ceilings dripping from condensation and developing mould growth
Rust-Oleum 5090 Anti-Condensation Coating should be used on ceilings and walls. Rust-Oleum 5090 Anti-Condensation Coating is intended for 1 coat application by airless spray however the product can also be applied by brush or roller in 2 - 3 coats resulting in a textured finish. Rust-Oleum 5090 can be used where steam or water vapour formation occurs, in order to prevent condensation and dripping.
1 litre of product will, after drying, absorb at least 400 grams of water!
Old coatings should be humidity resistant, if not, remove or seal with Rust-Oleum Grey Primer 5980. Approvals: Mould resistance by Itec. Absorption by Ceripec.
Coverage: 5.4m2 per litre
Touch Dry: 1 hour
Application: Brush, Roller, Spray Disclaimer
Please download and carefully read product datasheets before application
|
