Coo-Var Anti-Graffiti Sealer Coat
Coo-Var Sealer Coat is a clear 100% acrylic sealer dispersed in water and free of volatile organic solvents. Low odour, non-flammable and low toxicity. Excellent water and mildew resistance on porous surfaces.
Uses
Coo-Var Sealer Coat is used as a transparent sealer for porous surfaces prior to application Coo-Var GP101. Can be used to minimise the darkening of sandstone and other natural stone products. Will also minimise the ingress of water which could lead to mould and mildew discolouration.
Surface Preparation
All surfaces should be free of dust, soil and grease and preferable vacuum cleaned. Minimum drying temperature is 8ºC. Coo-Var Sealer Coat should NOT be applied if the surface temperature or the ambient temperature is likely to fall below this temperature during the drying period.
Wash Up: clean equipment with warm water as soon as possible after use.
Curing Properties
Coo-Var Sealer Coat's Cure rate will depend on conditions but typically, touch dry is achieved within 30 minutes at 25ºC/70% RH and can be recoated with Coo-Var Anti-Graffiti & Flyposting Protection System after 24 hours.
Coverage: Approx. 10m2 per litre
Touch Dry: 30 mins
Application: Brush, Roller, Spray Disclaimer
Please download and carefully read product datasheets before application
|
