Anti Slip Tape
Self-adhesive anti slip surfaces for steps, ramps, floors, vehicles etc. Anti Slip Tape provides an instant anti slip surface for steps, ramps, floors, vehicles, boats etc.
Availability:
Anti-Slip Tapes are available in 18m x 50mm rolls in Red, Yellow, Green, Blue, Grey, White, Black, Hazard and Clear.
*Anti-slip Tape ’Aqua’ (White) is available for barefoot areas only such as showers, pool surrounds etc.
Click here to see the anti-slip products brochure!
Surface Preparation:
The surface must be clean, dry and smooth.
Priming:
Anti-Slip Tape can be applied directly onto clean, smooth, non-porous surfaces. We recommend that Anti-Slip Primer is used to improve adhesion and durability on porous surfaces.
Application:
Apply at temperatures above 10ºC. Peel off backing strip and firm into place using foot pressure or soft rubber mallet. The tape can be walked on immediately but maximum adhesion is achieved after approximately 24 hours. Anti-Slip Edge Sealer is recommended in wet or heavy wear conditions (see below).
Limitations:
Anti-Slip Edge Sealer and Anti-Slip Primer are not recommended for use with Anti-Slip Tape ‘Aqua’. Disclaimer
Please download and carefully read product datasheets before application
|
