Graffiti Magic - Non-Darkening Sealer
Clear water based primer for use on porous substrates prior to application of Graffiti Magic
A clear, water based primer sealer for use on porous substrates prior to the application of Graffiti Magic. This applies where application directly onto the subtrate would result in the ‘wetting out’ or darkening of the surface.
Use of Non‐Darkening Sealer helps to prevent or minimise any change in the appearance of the coated surface. It can also be used to seal very porous substrates to improve the spread rate of the Graffiti Magic protective coating.
Non‐Darkening sealer can be applied onto a wide variety of porous surfaces (eg. Brick, mortar, concrete, render porous stone and bare timber). It is not suitable for sealed or previously painted surfaces.
To test the effectiveness of the Non‐Darkening Sealer we strongly recommend a small discrete trial application be carried out.
Product Information
• Primes porous surfaces
• Seals and smooths substrates
• Works well with Graffiti Magic Coating
• Commercial Use
Graffiti Magic is a single pack clear mix solution which when applied to surfaces allows the safe and rapid removal of all forms of graffiti without the use of harsh cleaning chemicals. You can find Graffiti Magic here.
Coverage: 10 - 12m sq per litre
Touch Dry: 1 - 2 hours (depending on conditions)
Application: Brush, Roller, (Spray - for large areas) Disclaimer
Please download and carefully read product datasheets before application
|
