Zinsser Bulls Eye 1-2-3
Water-Base Primer-Sealer All Surface, All Purpose Stain Killer Bond Coat Interior and exterior
• Adheres to all surfaces without sanding
• Seals stains, graffiti and tannin bleed
• Mould & mildew resistant film
• Rust inhibitive – great for new metal
• Fast 1 hour dry time
• Tintable to mid tone colours
Since 1982, professionals and do-it-yourselves have relied on Zinsser Bulls Eye 1-2-3® Primer-Sealer to quickly and effectively prime and seal a wide variety of interior and exterior surfaces – new drywall, wood, masonry, metal, glossy surfaces – and more. Offering great adhesion without sanding, Zinsser Bulls Eye 1-2-3® is a "bond coat" primer that's great for hard-to-stick surfaces like old glossy paints and clear finishes, metal, fibreglass, PVC, composites –even glass & tile.
Zinsser Bulls Eye 1-2-3® is mould & mildew-resistant, so it's great for high-humidity areas like bathrooms and laundry rooms. It offers effective resistance to the formation of mould & mildew on the underside and surface of the primer film, prolonging the life of your paint job. It has a well-earned reputation as a great stain blocker, permanently and completely sealing stains from crayons, graffiti, greasy spots, tannin – even light water stains. Formulated with high performance proprietary resins, it is the "go to" primer for binding chalky surfaces like aluminium or previously painted siding – and for priming possibly high pH surfaces like concrete, stucco, plaster and fast setting joint & texture compounds.
Zinsser Bulls Eye 1-2-3® also inhibits rust formation when applied over clean ferrous metal such as iron and steel, eliminating the need for a separate, rust inhibitive primer. And, unlike other water-base primers, it dries to a smooth, tight film and resists flash rusting. Bulls Eye 1-2-3® inhibits long-term rust from developing under the primer film when dry, making it ideal for priming interior and exterior metalwork such as iron railings, steel doors and metal panels.
With superior sealing qualities and great hold out, Zinsser Bulls Eye 1-2-3® is also an outstanding base coat for any decorative painting or faux finish project — ragging, frottage, marbling, wood graining — even under metallic finishes. Zinsser Bulls Eye 1-2-3® is ready to recoat in just 1 hour and can be tinted toward the colour of your topcoat to eliminate the need for one coat of paint—saving both time and money.
Recommended Uses – Apply to interior and exterior – walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces. Zinsser BULLS-EYE 1-2-3 bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. Provides a rust inhibitive coating on iron railings, steel frames, piping, etc. Resists the growth of mould and mildew on primer film in damp, humid environments. Resistant to high pH surfaces (up to 12.5) including; plaster, poured concrete, concrete block, stucco and ‘hot’ joint/texture compounds. Seals porous surfaces and traps most stains in the primer film – graffiti, grease, rust, cedar & redwood tannin, creosote, and asphalt stains. Some stains may require a second coat.
Interior Substrates – New or previously painted drywall, cured plaster, cement, poured concrete, concrete block, stucco, wood (pine, fir, birch, oak and plywood), aluminium, iron, steel and galvanized metal, PVC, glossy laminates and other interior surfaces.
Exterior Substrates – Recommended for all types of wood (New or previously painted pine, fir, cedar, redwood, plywood, T-111, and pressure treated wood), hardboard, metal (aluminium, steel, iron and galvanized metal), PVC, fibreglass, masonry (stucco, concrete block, poured concrete and brick).
Rust Inhibitive – Dries to a tight, water resistant film that inhibits development and spread of rust on metal. Remove rust and wipe surface clean with a rag dampened in alcohol.
Mould & Mildew Resistance – Resists the growth of mould and mildew on the primer film.
High pH Resistance – Can be applied to high pH surfaces (up to 12.5) without bubbling, lifting or degrading due to high alkalinity making it an ideal primer
for concrete, stucco, plaster & fast setting joint/texture compounds.
Cedar & Redwood Bleed – Traps tannins in the primer film to prevent them from ‘bleeding’ into the finish coat. For best results, allow to dry overnight before applying topcoat. Very porous woods may require two coats before topcoat.
Chalky Siding – Contains chalk-binding resins for use on moderately chalked aluminium or previously painted siding and trim.
Glossy Surfaces – Adheres to glossy enamel paints and clear finishes, Formica®, Masonite®, PVC, fibreglass, vinyl – even ceramic tile – without pre-sanding or surface de-glossing.
Coverage: 10m2 per litre
Touch Dry: 35 mins
Application: Brush, Roller, Spray Disclaimer
Please download and carefully read product datasheets before application
|
