Anglo Epoxy Crack Filler
Anglo Epoxy Crack Filler is a liquid epoxy resin for filling narrow cracks in concrete floors.
• Fast curing
• Quick and easy to apply
• Economical in use
• Solvent free
• Non-shrink
Usage rate: 500ml will fill approx. 25 linear metres of a crack 2mm wide and 5mm deep. (Cracks will vary in dimensions so figures cannot be precise).
Size available: 500ml
Preparation:
Cracks in concrete floors that require filling should be free from dust and debris and should be clean and dry. Expansion joints should be filled using a flexible jointing material such as Anglo Flexi-Joint Fill.
Mixing:
Empty the contents of the curing agent tin into the tin of resin and using a flat mixing blade, stir thoroughly. During mixing, scrape down the sides and bottom of the tin to avoid unblended resin / curing agent creating ‘soft spots’ in the cured product. WARNING : Once mixed, the cured product will quickly become hot so insulated gloves must be worn and the product used within 20 minutes.
Application:
Carefully pour out of the tin onto and along the line of the crack and level off by using a straight edge or plastic scraper. Wipe away any excess. Leave to harden for approximately 4 hours at 20OC before coating or overlaying. The repair may be coated with any type of floor paint or high performance coating such as Anglo Epoxy Floor Paint.
Please Note:
Fine cracks where a side of the floor has subsided can also be filled, but it will be impossible to achieve a flush finish. Anglo Epoxy Repair Mortar can be used to make up the difference in floor levels. Small holes can be filled, due to the solvent free and non-shrink properties of this product.
Curing Time:
Normally 3-4 hours at 20OC. Low temperatures will extend curing time. Disclaimer
Please download and carefully read product datasheets before application
|
