Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Product Type
Product Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Size
Size
Our selection of accelerators at Rawlins Paints can be added and mixed to specific products and manufacturer ranges to reduce drying times and curing rates. This helps to fast-track new build, maintenance and refurbishment projects such as car parks and balcony decking membrane systems, minimising disruption to business.
Our Technical Support Team are on hand to advise on the best solution for your needs - contact them on 0113 2455450 (option 2) or send a message to [email protected].
There are 10 products.
Active filters
Remmers ACC H (Accelerator PH) is a solvent-free, amine accelerator for Remmers Epoxy Flex PH and Remmers Epoxy ST 100. Through the addition of Remmers ACC H the drying times and curing rates of Remmers Epoxy Flex PH and Remmers Epoxy ST 100 can be reduced.More Information Delivery Info
Remmers Accelerator D40 is a single component liquid catalyst used to reduce the cure period of the PUR Indu Color D40.Enables faster installation of the car park and balcony decking membrane system Localised remedial works can be carried out in a short period of timeMore Information Delivery Info
Smartkote Protectakote UVR Smooth is a tough, aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR Smooth is single component, ready to use and easy to apply.High adhesion to most surfaces including metal, concrete, wood, fiberglass, PVC and rubber. Prevents rust and corrosion....
Smartkote Protectakote Accelerator is a pure, solvent free catalyst used to speed up the drying time of Protectakote non-slip and smooth coatings. Pre-weighed – just add and stir in, long pot life, drying times can be reduced to as little as one hour, humidity and low temperature effects which extend drying times can be reduced.More...
Smartkote Protectakote UVR Accelerator is a liquid second component which may be added to ProtectaKote UVR if desired to increase the rate at which the product cures at low temperatures or humidity. Protefctakote UVR Accelerator is not intended for use at normal room temperatures.More Information Delivery Info
Sikafloor 54 Booster is a liquid which is added to Sikafloor® epoxy based resins to accelerate the curing process.May only be used by experienced professionals. Accelerator to shorten the curing time of Sikafloor®- 150/-151. Fast track flooring applications for new build, maintenance and refurbishment. Easy to add and mix into...
It is possible to speed up the curing process of Pre- Catalysed Resin using the Vuba Accelerex additive.A highly catalysed polyurethane resin (Part A) Diluted in resin to enable the addition of small amounts of catalyst without risk of over catalysing the resinMore Information Delivery Info
Polymer admixture for thin section underfloor heating screeds, providing a high strength screed that dries faster than conventional sand.Open to foot traffic after 24 hours, commisioning process after 7 days Conforms to BS EN 13813 40mm minimum thickness with 16mm diameter heating pipes Requires only 20mm cover over heating pipes Rapid...
Rapid drying additive for underfloor heating screeds, used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It also promotes high early strength, permitting early access by following trades.Conforms to BS EN 934-3 Only 30mm of...
Fast drying liquid screed additive for site batched screeds - formerly known as RonaScreed 8 Day Overlay.Reduces on site delays - much more cost effective than cement replacement products Lay flooring over 50mm screeds after 4 daysOver 75mm and 100mm screeds after 6 daysConforms to BS EN 13813 Early commissioning of underfloor...
Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Product Type
Product Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Size
Size
