Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...
Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...
Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...
A range of solvents to thin products and clean equipment, spray machines for application of our paints, paint test equipment, application equipment such as brushes and rollers and finally personal protective equipment such as face masks and gloves to compliment our range of paints and coatings.
Our solvents for our products are a critical part of the cleaning process either before or after application as well as thinning of the products where required. We offer a selected range of high quality Graco spray machines that can provide a professional finish for small projects right up to extended spray periods of heavy duty industrial coatings.
The paint test equipment we offer helps contractors test projects before an after application to aid their applicators or resolve issues that may occur. We have a large range of competitive application tools that are preferred by the professional tradesman and are chosen specifically to compliment our paints and coatings to ensure optimum application.
Finally our personal protective equipment provides mandatory safety measures to ensure safe application of our paints.
- Brand: Tor Coatings
Tor Standard Urethane Thinners (TH99) is a blend of Xylene and Methoxy Propyl Acetate for the thinning (where necessary) of Tor Two pack and Moisture Cure Urethanes and for cleaning of the same materials from application equipment.
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
Tor Cleaning Solvent (TH0) is a blend of dimethyly adipate, dimethyl glutarate and dimethyl succinate used for cleaning of solvent based and solvent free materials from application equipment.
Tor General Purpose Thinner (TH10) is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Tor HF Aromatic Thinners (TH025), high flash point substitutes for Xylene used for thinning chlorinated rubber paints, etc, and for the cleaning of the same materials from application equipment.
Tor Epoxy Thinners for the thinning (where necessary) of Tor Two Pack epoxy based materials and for cleaning of the same materials from application equipment. A blend of Xylene and Glycol Ether.