Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Acrylic

There are 7 products.

Showing 1-7 of 7 item(s)

Active filters

PPG Sigma Vikote 56

PPG Sigma Vikote 56 is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F). Dries in as little as 30 minutes (@ 20°C) Apply by spray, brush or roller Gloss finish...

Price £77.40
In stock

HMG Acrythane XSC21

HMG Acrythane XSC21 (Base) is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Hardener (Part 2) HMG...

Price £30.69
In stock

HMG Acrythane XSC21 Clear

HMG Acrythane XSC21 Clear is a premium quality, high solids 2K Acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Clear Hardener (Part 2)...

Price £25.52
In stock

HMG Acrythane SC601 Colours

HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours Activator (Part 2)...

Price £26.10
In stock

HMG Acrythane XSC98 11

HMG Acrythane XSC98 11 (Base) is an ultra high solids (UHS) compliant coating. It is 2K acrylic cured with an isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC98 11...

Price £33.64
In stock

HMG Nisocoat 2

HMG Nisocoat 2 (Base) is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG...

Price £49.91
In stock

International Intercryl 700

International Intercryl 700, a single component water borne finish formulated on weather resistant acrylic copolymer technology, a durable finish coat for both water based and solvent based systems where colour and gloss retention are important. Choose from over 350 RAL and BS colours Dries in just 3 hours For industrial environments, new...

Price £106.96
In stock