The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting.
Advantages
All packs achieve BS Class 1/0 Surface Spread of Flame protection
For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
ADVANTAGES
Clear or stained finish
Tough/Durable finish
UV and wear protection (Matt & Satin)
Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection.
Recommended Uses
Buildings
Car parks
Petrochemical plants
Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 90 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
Rawlins Paints stock a range of aerosol topcoats to complete your project with a professional and high-end finish. To get the best results, we recommend using these topcoats over a compatible primer. Choose from clear, coloured, metallic or fluorescent aerosol topcoats to create the look you want, easily.
Aerosol topcoats provide a 'spray' finish that would normally only be able to be achieved by a professional with expensive spray equipment. So, whether you're touching-in a job on-site or completing a new project, these aerosol topcoats can be a fantastic way of achieving a professional finish easily and cheaply.
Rust-Oleum Hard Hat Topcoat is the number 1 industrial paint aerosol, a top quality high performance topcoat available in 45 RAL colours for use on on bare metal, wood and concrete.
Convenient spray can topcoat for small maintenance jobs or for touch-up
Fast drying - touch dry in just 15 minutes (at 20°C)
Dry to handle in 30 minutes
Best...
Rust-Oleum CombiColor Aerosols are a one coat maintenance aerosol paint by Rust-Oleum for metal with superior metal protection, even direct to rust. As a primer and a topcoat in one that hides in one cross layer, CombiColor Aerosol is ideal for small maintenance and touch-up jobs.
Primer and topcoat in one
For application onto rust, bare...
A low odour vertical aerosol that is a stain killer and ceiling touch-up paint in one. Zinsser’s stain blocking primer technology is incorporated into this next generation product that offers a flat white finish, which matches most acoustic ceiling tiles and white ceiling paints.
Rust-Oleum aerosols filled with Rust-Oleum CombiColor that can be produced in any RAL or BS colour in a Satin or Gloss finish! Ideal for small maintenance, touch-up jobs or one off special colours.
Primer and topcoat in one
For application onto rust, bare metal and wood
Hides in one cross layer
Ideal for touch-up and small objects...
Coo-Var Hammercote Smooth Aerosol is a premium quality durable coating which provides a glossy smooth finish in a handy 400ml aerosol. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use....
A quick-drying, non-yellowing, durable clear top coat from Rust-Oleum's expansive range that seals, protects and enhances painted surfaces including wood, metal, plastics, ceramics and more. The perfect top coat for a lasting professional finish.
Ultimate protective clear coating
Indoor/outdoor
Durable, corrosion-resistant
Rust-Oleum Hard Hat 2111 Sparkling Aluminium (Topcoat Metallic) is a metallic finish spray ideal for maintenance and touch-up jobs in industrial environments on metal substrates. Heat-resistant up to 100°C it is Ideal for machinery, pumps, toolboxes, etc.
Gloss or sparkling metallic appearance
To restore the metallic look of many different...
Rust-Oleum Hard Hat Fluorescent Topcoats are a range of highly visible fluorescent coloured aerosol marking paints for use on railings, signs, machinery, walls, etc. in maintenance and industrial environments. Increased safety, useable internally and externaly.
Highly visible fluorescent coatings
Ideal for railings, signs, colour coding...
Rust-Oleum Hard Hat 2115 Aluminium offers a metallic appearance and durable protection - to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Heat resistant up to 100°C, ideal for maintenance and touch-up jobs in industrial environments.
Gloss or sparkling metallic appearance
To restore the metallic look...
Rust-Oleum Hard Hat 2116 Stainless Steel Coating delivers double-acting protection (chemical and mechanical), providing a metallic appearance and durable protection to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Ideal for maintenance and touch-up jobs in industrial environments.
Greater abrasion...
Rust-Oleum Hard Hat 2500 Transparent Protection is a non-yellowing transparent protecting coating that can be applied over various Rust-Oleum products, old fading coatings or directly onto many surfaces like aluminium, brass, bronze, chrome, copper to provide increased durability, exterior performance, gloss level and cleanability....
Make spray painting jobs simple and comfortable with Rust-Oleum High Performance Comfort Grip. Its ergonomic design provides maximum control when using an aerosol paint, making it easy to complete large projects.
For minor maintenance work and small touch-up tasks, aerosol topcoats can be the most cost-effective way of achieving unusual results and finishes that you may not want to spend a lot of money on buying a paint to do the same task, when you might never require the same finish ever again. Aerosols, however, are easy to store, transport and have-to-hand in unexpected situations where a caretaker, janitor or maintenance manager may quickly want to recolour, touch-up or restore signage, surfaces or furnishings.
Aerosol topcoats can deliver a wide range of finishes on wood, metal, concrete, and other surfaces and substrates – please refer to product datasheets for recommended use:
Hammered finish
Sparkling aluminium finish
Stainless steel finish
Fluorescent finish
Transparent finish
Metallic finish
Gold or silver finish
High-visibility finish
The colour options are massive, and with Rust-Oleum Custom Filled Aerosols, you can have almost any RAL or British Standard colour for bespoke and company colour conformity projects.
