CLEARANCE - Bradite HD Floor + Wall

Bradite HD Floor + Wall is a heavy-duty coating for walls and floors that is well-suited to factory and industrial environments that need ultra protection and an easy-to-clean surface. Also suitable for hygene-sensitive areas such as hospitals and more. Advantages Available in more than 350 colours in RAL & BS Water-based epoxy...

Price £52.40 Regular price £104.80
In stock

CLEARANCE - Bradite Rapid

Bradite Rapid is a high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance.  Advantages Available in more than 350 colours in RAL &...

Price £47.91 Regular price £95.82
In stock

CLEARANCE - Bedec Multi Surface Paint Colours

Bedec Multi Surface Paint is a renowned non-yellowing, water-based paint that resists flaking or peeling because of its outstanding flexibility. Low VOC Environmentally friendly Quick drying Micro-porous Low odour No primer/undercoat required Matt, satin or gloss Colour choice PLEASE SEE LONG DESCRIPTION FOR AVAILABLE QUANTITIES...

Price £16.44 Regular price £32.88
In stock

CLEARANCE - Sherwin-Williams Cleanser/Thinner No.5

Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment. 1 x 5l available - now 50% off

Price £13.73 Regular price £27.47
In stock
All sale products

Need Help?

All Metal Paint Ranges

There are 12 products.

Showing 1-12 of 12 item(s)

Active filters

Rust-Oleum CombiColor

Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Over 400 colour options including RAL, BS & NCS Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Use...

Price £16.54
In stock

Sherwin-Williams Acrolon C137V2

Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...

Price £71.95 Regular price £79.94
In stock

International Interthane 990

International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...

Price £109.67
In stock

Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...

Price £58.12 Regular price £64.58
In stock

International Interzone 954

International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. Coverage Calculator

Price £108.47
In stock

Jotun Hardtop XP

An on-site friendly, glossy polyurethane topcoat for most epoxy systems where a durable, weather-resistant finish is required in a wide range of aggressive atmospheres. Jotun Hardtop XP is one of the most popular polyurethane topcoats – protecting millions of square metres every year. Another Jotun paint that can be applied by airless spray,...

Price £55.41
In stock

International Interseal 670HS

International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Coverage Calculator

Price £117.12
In stock

International Interlac 665

International Interlac 665 is a single component alkyd gloss enamel finish. International Interlac 665 is a maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants.  Coverage Calculator

Price £47.48
In stock

Jotun Pioner Topcoat

Jotun Pioner Topcoat is a one component physically drying acrylic coating that has a semi gloss finish with good gloss retention. It is fast drying and is to be used as topcoat in atmospheric environments. Jotun Pioner Topcoat is recommended for marine topside and superstructure areas and for a wide range of industrial structures. Coverage...

Price £38.03
In stock

Jotun Jotamastic 90

Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in...

Price £57.35
In stock

Rust-Oleum Mathys Noxyde

Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 15 years of protection with excellent waterproofing and elasticity. Features and Benefits Unrivalled corrosion protection and waterproofing Approved for corrosion class C5-M high (ISO 12944)...

Price £53.97
In stock

International Intertherm 228HS

International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F)....

Price £379.71
In stock