Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
All Metal Paint Ranges
Coo-Var Hammercote Hammered Aerosol is a fast-drying coating which gives a hard and durable hammered finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Apply direct to metal or primer Very fast drying Full hardness reached after several days Available in black and silver grey
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Coo-Var Hammercote Hammered Finish is a fast-drying coating which gives a hard, hammered gloss finish to metal objects. ADVANTAGES Direct to prepared metal or suitable primer Full hardness is reached after several days Very fast drying Also available in smooth finish Heat resistant up to 150°C 10 colours!
Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...
Coo-Var Hammercote Smooth Aerosol is a fast drying coating which gives a hard, durable, smooth finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Very fast drying Full hardness after several days Apply direct to metal or primer Durable Gloss finish Rust resistant Heat resistant up to 150°C Interior/Exterior use
Sherwin-Williams Macropoxy M922 (formerly Epigrip M922) is a high solids, 2-pack glass flake epoxy pigmented with micronised glass flake and anti-corrosives to provide anti-corrosive protection of blast cleaned steel and cathodically protected steel. Macropoxy M922 possess excellent abrasion resistance and has excellent resistance to immersion in sea...
Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer
Sherwin-Williams Macropoxy C123 (formerly known as Epigrip C123) is a high solids, glass flake epoxy coating for the anti-corrosive protection of blast cleaned steel. Macropoxy C123 is especially suitable for steel structures, bridges and infrastructure in aggressive atmospheric conditions. Network Rail Item 7.2.3., Highways Agency Item No. 123.
Coo-Var Hammercote Thinner (also known as Coo-Var Thinner 15) is a C8-C10 aromatic hydrocarbon solvent mixture used as a slow evaporating thinner/brushwash for Coo-Var Hammercote Hammered Finish (not Hammered). Clear, thin liquid brushwash for all finishes.
Sherwin-Williams Macropoxy L524 (formerly known as Epigrip L524) is a high build 2-pack modified epoxy coating for immersive protection in salt water, fresh water and crude oil. Recommended Uses Protection of ships bottoms and cargo tanks Submerged/splash zone areas of marine structures Jetties External protection of buried and other pipelines.
Sherwin-Williams Macropoxy M330 (formerly known as Epigrip M330) is a 2-pack epoxy sealercoat for use over zinc silicate and other types of zinc rich primers. It is also used as a blast primer for use over stainless steel.
Sherwin-Williams Macropoxy M455V2 (formerly known as Epigrip M455V2) is a high performance 2-pack epoxy protective finish for structural steel. It is suitable for use in marine, chemical or other aggressive environments, but not immersed conditions.