CLEARANCE - Coo-Var Zinc Phosphate Primer

Coo-Var Zinc Phosphate Primer is a high performance, modified alkyd metal primer. It has very good anti-corrosive properties. Its high durability makes it ideal for use in coastal areas. Product Features Ideal when wood and metal are combined in the same structure as it will prime both surfaces A stronger primer than most basic DIY...

Price £24.81 Regular price £49.62
In stock

CLEARANCE - Teamac Antifouling D Plus

Teamac Antifouling D Plus, discourages the growth of barnacles, weed, and other water life on the submersed hull of your boat. Contains a high level of cuprous oxide and a blend of biocides to give good antifouling performance on yachts and boats in speeds ranging from 25-30 knots. Award Winning Product Excellent Performance Available in...

Price £15.62 Regular price £31.24
In stock

CLEARANCE - Timberex Aqua

A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs. 1 x 1l Black available - now 50% off

Price £9.87 Regular price £19.75
In stock

CLEARANCE - Timberex Coloured

For commercial or domestic use, on floors, stairs, panelling etc. Timberex Coloured penetrates deeply into the wood filling the pores to form a wear and water resistant surface. 1 x 1l Driftwood available - now 50% off

Price £9.69 Regular price £19.39
In stock
All sale products

Need Help?

All Metal Paint Ranges

There are 29 products.

Showing 1-12 of 29 item(s)

Active filters

  • Categories: Interseal
  • Categories: Jotamastic
  • Categories: Hammercote

Coo-Var Hammercote Hammered Finish

Coo-Var Hammercote Hammered Finish is a premium quality durable coating which provides a glossy hammered finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly...

Price £18.59
In stock

International Interseal 670HS

International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Coverage Calculator

Price £117.12
In stock

Jotun Jotamastic Smart Pack HB

Jotun Jotamastic Smart Pack HB is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible, provides long lasting...

Price £152.32
In stock

Coo-Var Hammercote Smooth Aerosol

Coo-Var Hammercote Smooth Aerosol is a premium quality durable coating which provides a glossy smooth finish in a handy 400ml aerosol. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use....

Price £7.74
In stock

Jotun Jotamastic Smart Pack

Jotun Jotamastic Smart Pack is a two component amine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller with a 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or...

Price £92.47
In stock

International Interseal 670HS (Winter Grade)

International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a...

Price £117.12
In stock

Coo-Var Hammercote Smooth Finish

Coo-Var Hammercote Smooth Enamel is a premium quality durable coating which provides a glossy smooth finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly...

Price £18.59
In stock

Jotun Jotamastic SF WG

Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion. Coverage...

Price £182.69
In stock

Coo-Var Hammercote Thinner

Coo-Var Hammercote Thinner is used as a brushwash for all hammercote paints or as a thinners for Hammercote Smooth (not Hammered).  Product Features Also known as Coo-Var Thinner 15. C8-C10 aromatic hydrocarbon solvent mixture. Used as a slow evaporating thinner/brushwash for Coo-Var Hammercote (not hammered). Clear, thin liquid...

Price £12.94
In stock

Jotun Jotamastic SF Alu

Jotun Jotamastic SF Alu is a two component polyamine cured epoxy mastic coating aluminium pigmented to provide a metallic silvery finish that is a surface tolerant, solvent free, high build product well suited for early immersion. Specially designed for areas where optimum surface preparation is not possible or desired. Coverage Calculator

Price £171.27
In stock

Jotun Jotamastic SF

Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity....

Price £171.27
In stock

Jotun Jotamastic Plus

Jotun Jotamastic Plus is a two component amine cured epoxy mastic coating that is surface tolerant, high solids and high build. It is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish...

Price £162.28
In stock