Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Aluminium paints available to buy today from Rawlins Paints from manufacturers including Teamac, Jotun, International, and Blackfriar, have been carefully selected to offer all the qualities your construction requires. Included among those listed below are thermal protectors, aluminium coatings for interior and exterior applications, and a small variety of alternate colour finishes.
Contact a member of our Technical Support Team on 0113 245 5450 if you'd like more information about, or to find out the suitability of the listed products, which offer protection from corrosion under insulation (CUI), thermal shock, and heat resistant and substrate protection to areas prone to wet and dry cycling. Product uses range on a scale from internal radiator protectors to external industrial chimneys and fire stacks.
Blackfriar Aluminium Paint is heat resistant up to 150ºC and provides long-lasting, heat-resistant protection for interior and exterior surfaces, for use on metal and wood, on surfaces including car wheels, gates, railings, pipework etc.
Teamac Extra Brilliant Aluminium Paint is an all metal coating with thermal and photo reflective properties that can be used as a heat and light reflective protective finish on car wheels, hot water pipes, radiators, metal car components. It provides heat resistance up to 150°C.
Teamac High Temperature Aluminium Paint. A high quality enamel for use at temperatures up to 450°C indirect heat. Advantages Ideal for use in areas prone to heat Can be used as a single coat for fire surrounds, radiators, hot pipes and more Click to jump down to Technical Data
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.
Nu-Base PU Floor Finish has the power to withstand tough applications, where temperatures may reach 150°C, or where chemicals may be present. Advantages Excellent for industrial flooring. Two pack solvent-based. FeRFA Class Type 2. Excellent for industrial flooring.
PPG SigmaTherm 175 is a heat-resistant modified alkyd aluminum finish that offers heat resistance up to 175°C (350°F). One component High-brilliancy Spray application improves the appearance Gloss finish Touch dry in 1 hour (at 20°C (68°F)) Ready to overcoat after 16 hours (at 20°C (68°F))
PPG SigmaTherm 540 is a one-component, heat-resistant, moisture-curing silicone aluminum coating for protecting steel surfaces in internal and external applications. Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation. Top Features Dry heat resistance up to 600°C (1112°F) No heat cure...