The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
If your priority is in making sure flooring is safe underfoot, whether inside or outside, Rawlins Paints can help. We stock a wide range of non-slip paint for stairs, non-slip treads, decking strips, anti-slip tape, preformed GRP non-slip stair treads, stair nosing – in fact, everything you need to ensure safe floor and stair surfaces, no matter the environment.
We specialise in anti-slip safety products and our tapes, paints and GRP products provide a comprehensive solution to most of the areas that you could need slip resistance improvement.
If you have any questions not answered here or would just like some advice on our vast range of anti-slip products, contact our Technical Team.
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
SuperGrip Lite Multi Purpose Step Covers are DDA compliant GRP (Fibreglass) preformed panels that cover the entire step with a cost effective, anti-slip surface. Black anti-slip surface with a 55mm curved yellow nose they are ideal for damaged, worn or slippery stairs inside or out and are easy to fix with glue and screws.
Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and it will provide a heavily textured finish incorporating an anti-slip aggregate which is dispersed within the material upon application. Each pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface.
Anti Slip Stair Tread Covers are designed to cover the entire stair and provide a firmer grip underfoot. Our Anti-Slip Stair Tread Covers work well in wet, icy or greasy conditions and can transform tired looking staircases whilst minimising the risk of slips, trips, and falls.
Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.
Anti Slip Stair Nosings are easy to fit and help highlight the hazardous leading edge area of the step. This is the ideal product if you are looking for an affordable solution to minimise the risk of slips, trips, and falls in the workplace or in your own garden. Not only does stair nosing add an extra anti-slip surface underfoot, but it also...
503 Easy Clean Anti Slip Coating is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result provides a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
Anti-Slip Decking Strips provide an easy to install solution that gives timber a non-slip, weatherproof surface. Tough & resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould. Ideal for use in garden decking, family picnic...
Coo-Var® Suregrip® Anti-Slip Floor Paint is already-mixed floor coating for suitably primed concrete, wood, metal and GRP which provides a rough, anti-slip finish when dry. Suregrip provides durability, decoration and protection. Suitable for indoor and outdoor use. Ideal For: Boats Steps and stairways Disabled ramps...
A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals. Tough, long lasting finish Coarse...
Anti-slip tapes are great as they are quick and easy to apply. As they’re self-adhesive, you generally only need to clean and prepare the surface before application, making them easy to install and extremely cost effective.
We have self-adhesive anti-slip tape specifically for wet areas, used for leisure centres, swimming pools and gyms. Easily snipped to the appropriate lengths, they stick on to pretty much any surface and are ideal for light to medium use areas. If you need to use them on very wet or areas that have frequent wear, we recommend that you use our Primer/Sealer and Edge Sealer to make sure of the quality of the finish.
Anti-slip tape is also available for dry or mostly dry areas, and comes in a wider range of colours. Equally easy to apply, it’s a very economically sound way of making sure edges are marked and easy to see, for example on steps, ramps, floors, boats or anywhere else that people need to be aware of.
Anti-Slip Stair Treads and Covers
We stock a range of anti-slip step and anti-slip stair tread and landing covers, available in either self-adhesive, screw down aluminium or GRP. We stock a range of sizes, grades and colours depending on what you need. These range from non-abrasive self-adhesive treads for stairwells or maximum grip for areas that are very slippery.
The GRP anti slip stair treads and GRP landing covers are made of fibreglass (Glass Reinforced Plastic) and are extremely durable thanks to the chemically bonded grit that covers them. They’re used a lot particularly in the construction and rail industries and are available in a range of colours, including the yellow and white nosing that meets building regulations.
Ideal for exterior and interior stairs in stations, offices, schools, municipal buildings and other public areas, our Anti Slip Tread Covers are ideal to spruce up steps to make them safe, without spending a fortune. Perfect for worn and slippery steps, they offer amazing slip resistance even in oily, icy and wet conditions. These treads are preformed, super-fast to install and available in black with yellow or white nosing. You just need to prepare the surface and glue or screw into place. They can be walked on immediately meaning you don’t need to disrupt an area for long while making them safe. They have a tread of 345mm and a 55mm nosing and are available in various lengths.
Our Anti Slip Landing Covers are the bigger versions of our Anti Slip Stair Tread Covers, with all the same properties, for the larger landing areas on a staircase. The gritted surface provides long term anti slip resistance and helps conform with DDA legislation.
We have various standard lengths of Anti Slip Landing Covers available, all with 1220mm depth of tread and 55mm nosing. Made from 4mm thick GRP, the covers can also be cut to fit if you need a specific size that we don’t offer as standard.
Anti-Slip Stair Nosings
We have a range of very hard wearing stair edge nosings that add an anti-slip surface to the edge of staircases. Ideal for concrete stairs in public areas, schools, hospitals or anywhere a high volume of people will be using them. As well as standard finishes, we also stock anti slip luminous stair nosings for that added visibility.
Anti-Slip Floor Paints
Our anti-slip floor paints range from quick drying single pack paints right through to high build, solvent-free epoxy coatings. All give excellent finishes, with different grades of toughness and durability depending on your needs.
Non-slip floor paints are ready-mixed aggregate floor coatings which give rough anti-slip finishes to floors that need that extra grip. Ideal for floors in factories, for wheelchair ramps and boat decks, among many other uses.
If you’re looking for the best anti slip floor coating, then browse through our brands on offer. We stock lots of different options, including products by Blackfriar, Rust-Oleum and Coo-Var. Anglo Floor Paint Slip Resistant Grade is a great example of a non-slip floor paint that also gives an excellent finish on concrete floors. Ideal to spruce up a floor without compromising on safety, it dries to a tough finish and, like all our anti slip floor paints, is available in a range of colours.
If you need help to decide which anti slip coating is best for your needs, give our Technical Team a call and they’ll be happy to guide you through. Remember to consider whether the floor space is a low, medium or high traffic area and the surrounding environment.
Anti-Slip Marine Coatings
We also stock products specifically developed for boats and other sea faring vessels. As there is a need for a rough anti-slip finish on deck to keep crew-members safe when the vessel is in motion or in high seas, deck paints are tough aggregated coatings. Teamac Suregrip Deck Paint is available in a range of aggregate finishes and can be used as a safety coating on wood, metal, GRP and concrete. It can hold up to light traffic use and heavy footfall.
Slippery timber decking can be dangerous underfoot but we have plenty of non-slip solutions for residential and commercial uses. Easy to install and weather resistant, our range of anti-slip decking will create a safe, slip resistant environment.
We stock anti slip decking strips, which are a quick and easy solution used with standard timber decking. Rust-Oleum SuperGrip decking strips are made from fibreglass with a gritted surface and can be easily screwed down onto the timber. There is also a Rust-Oleum interior decking option, which have a finer surface making them easier to clean and ideal for schools, hospitals and any areas that need to be non-slip but don’t need to be as coarse as the exterior option.
Our anti slip decking solutions are good for areas near water as they’re moisture resistant and protected against moss and algae. We recommend adding Anglo Decking Cleats to these products as it will help to make the finish even more durable.