Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Marine growth, weed, barnacles and other sub-aquatic organisms that cling to the hull of a vessel can decrease its performance and, if a commercial vessel, its profitability. Not only do they slow the boat down, some marine growth also causes severe damage to the bottom of the boat over time. Antifouling paints can prevent this from happening to yachts and boats.
Rawlins Paints stock a range of marine and antifouling paints, including hard and self-polishing coatings. Self-polishing antifoul paints work by dissolving at a steady and known rate, so that there is always a fresh coat of antifouling protection in contact with the sea. It’s perfect for most types of boats, including sailing boats, yachts and cruisers.
- Brand: Jotun
Jotun Mare Nostrum SP is a self-polishing antifouling based on a unique binder combination system. ADVANTAGES Totally active surface Clean hull for the whole season Continuously renews True colour once immersed Excellent fouling protection For fresh water
Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an...
Jotun SeaQuantum Ultra is a one component state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.
Jotun SeaQuantum Ultra S is a state of the art chemically hydrolysing silyl acrylate antifouling coating. It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss. The initial smooth surface provides...
Jotun SeaForce 30 M is the optimal choice if you are looking for a very good antifouling for maintenance and repair. With a predictable and effective performance, SeaForce 30 M limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined...
Historically, thin sheets of copper were nailed over the hull to try and slow down and prevent the marine fouling but today antifouling paints are used. Anti-fouling paint discourages the growth of marine life on the boat hull and ensure a surface that can be easily scrubbed and cleaned. Anti-fouling coatings are used on domestic and commercial vessels with aluminium, steel, timber or GRP hulls.
Hard antifouling paints contain an insoluble binder and so the performance of the coating declines throughout the season. Ideal for speed boats these are very easy to sand and can be polished to give a smooth surface.
Teamac Antifouling Paints
We have a range of Teamac Antifouling paint products, including Teamac Antifouling D. This is an antifoul coating only to be used on steel, wood and GRP. This award-winning antifoul paint offers superior performance with a softer film and has been developed specifically for boats and yachts that have a speed up to 30 knots. If the boat is kept in sea water, then the antifouling coating will need to be replaced every 18 months. Easily applied by brush, roller or spray.
If you need an aluminium antifouling paint, Teamac Antifouling A is a high quality antifoul paint specifically for that surface. You will need to apply two coats to make sure the antifouling coating is as durable and effective as possible.
Jotun Antifouling Paints
We also stock a range of antifoul coatings by Jotun. For boats that only sail on sea water, Jotun Mare Nostrum SP is a self-polishing antifouling coating. Its unique properties keep the hull of the boat protected and clean for a whole season. Ideal for many types of speed boat, sailing boats and motor boats, light metal parts and propellers, it should be noted that you will need the white coloured antifouling paint if you want to apply to an aluminium hull.
It’s advised to apply antifouling paint to work with the paint system you already have on your boat. If that’s not possible, or you’re not sure which paints and coatings are used on your boat, you may be able to simply apply a sealer coat of Jotun Vinyguard Silvergrey 88 before applying the antifouling paint.
Jotun SeaForce 30, Jotun SeaForce 60 and Jotun SeaForce 90 are for professional use and all work in the same way but last for increasingly longer timeframes. A cost effective antifouling product, Jotun SeaForce will prolong the longevity of the hull and keep fouling at bay. SeaForce is a self-polishing antifoul and is used as a finishing coat. Jotun SeaForce 30 gives up to 36 months antifouling performance, with the other products giving incrementally longer periods of protection. It’s a low-cost antifouling paint and works extremely well when used with an anticorrosive primer and Jotun Safeguard ES as a sealer coat.
Specifically, for offshore constructions and structures that are immersed for extended periods of time, Jotun SeaQuantum Ultra provides excellent fouling protection to ensure that the surface performs for longer. It’s recommended for underwater hulls for vessels in dock and for newbuild vessels. It can be used for up to 90 months and offers incomparable protection.
If you’re not sure which antifouling paint you need for your vessel, contact our Technical Team for advice and information.