The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Asbestos Roof Paint
Corrugated asbestos roofing, asbestos cement and asbestos sheeting require specialist coatings to seal, repair and protect large surface areas. Rawlins Paints offer a wide selection of solvent and water-based rubber sealants and protective coatings for industrial properties, factories and commercial buildings. To help you get the right asbestos paint or sealant coating for the job, please refer to product data-sheets, or contact our technical support team, who'll be happy to assess your situation and provide recommendations for single or compatible combination products for roofing.
Asbestos roofing should not be left un-coated or unprotected, and in sealing the fibrous cement sheeting, these asbestos compatible paints and coatings will prevent water damage, or water seeping through to the underlying substrates and building architecture. Areas around asbestos sheets, such a roof tiles, flashings, box gutters, service ducts, outlet pipes, and areas which require a flexible coating, can also be protected and repaired using specialist paints and associated waterproofing products.
Eagle DoubleCoat Pro-Reflect Liquid Waterproofing, a liquid elastomeric waterproofing membrane reinforced with microfibers and high aluminium content, for waterproofing of most types of roof surfaces and exposed metal structures. Highly recommended for industrial units and warehouses. For most roofs: Galvanised steel Iron zinc Asbestos...
Tor Raincoat Fibretex (RC301) is a single pack, high build coating, based on a special modified acrylic/urethane resin system, containing inert pigments extenders and flame retardant agents, and reinforced with inert fibres for the waterproofing of sound solid sheeted pitched roofs (eg. asbestos/fibre, cement, factory coated profiled metal etc).
Tor Unicover W (RC430) has been developed for the fast and cost effective refurbishment of external vertical wall cladding and large internal projects. It allows re-colouring for corporate re-branding or change of ownership or simply extends the life cycle of the cladding. Water-based, extremely surface tolerant coating, ideal for application in warmer...
Teamac Acrylic Coating, is a cost-effective product to protect, refresh and decorate surfaces and substrates: Tile and brick roofs. Sealing asbestos sheets. Corrugated asbestos roofs on agricultural buildings and barns. General areas (not floors) of masonry, wood, rendering and plasterwork. Red, grey, or green low sheen finish on...
Britannia Aquashield Smooth is a highly effective waterproof roof coating that is ready to use and works instantly. For use on roofs, this smooth coating can be applied by brush, roller or squeegee: Suitable for flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal...
Rust-Oleum Mathys Dacfill Waterproofing is a watertight, water-based liquid membrane for roofs: Forms a lasting elastic coat without joints or seams on sloping roofs (min. 5% slope) Has been tested and independently approved for asbestos encapsulation which makes it an excellent alternative to asbestos sheet replacement saving cost, time...
Britannia Aquashield Emergency Leak Repair is a specially-formulated for emergency roof repairs no matter how bad the weather; can even be applied under water. Ideal for roofs which need immediate repair to stop leaks. Advantages Suitable for all building materials External use only Can be applied in falling rain
Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access. ADVANTAGES Seals isolated asbestos fibres Prevents asbestos release Permanently bonds asbestos fibres Available in 12m² or 50m²...
Britannia Aquashield Eco is an elastomeric, solvent-free waterproofing coating. Suitable for general maintenance work, it needs just one coat to provide a durable, water-resistant finish. Advantages Eco-friendly Water-based Can be used on asbestos cladding
GacoPro Roof Coating is a professional grade, 150% elastic, 100% silicone roof paint for flat and pitched roofs. ADVANTAGES 20 years waterproof protection Year round application Easy to apply by brush, roller or spray Protects against leaks, ponding water and severe weather Single pack Apply directly Competitive price More benefits...
Britannia Aquashield Aggregated Coating is ideal for application as a safety measure on high level walkways and gutters. Supplied ready to use and working instantly, can be used on a variety of substrates including asbestos cladding. Advantages Waterproofs instantly Available in 3 colours Excellent on flat and pitched roofs
Britannia Aquashield High Build is an excellent waterproofer for exterior pitched or flat roofs: Ideal for bitumen, metal, fibreglass, porous and non-porous roofs, including asbestos cladding Also suitable for concrete, brick, asphalt, iron and steel roofing materials Excellent waterproofing for roofs Contains added fibres that...
Asbestos Roof Sealers and Primers
Asbestos roof sealers and primers can be white, coloured or clear penetrating sealing agents, most are applicable by brush, roller or spray, and seal the asbestos surface without excessive material build-up prior to a topcoat. The asbestos sealer will help to bind and repair porous and old 'friable' asbestos roof sheets, and in doing so will encapsulate harmful dust and fibres from being exposed to workers, or members of the public. Ideally, asbestos primers and sealers would be used as a pre-treatment for porous asbestos roof sheeting, including corrugated roofing, and can be overcoated with asbestos paint.
Asbestos Paints and Coatings
These paints and coatings are perfect for asbestos roof renovation and minor repair work, in sealing and binding old asbestos fibres. As with all roof paints and coatings available at Rawlins Paints, they will extend and prolong the lifespan of the roof, providing long-term waterproofing and general weather protection - including colour stability against high UV exposure and a low sheen finish where required.
These premium grade and industrial standard asbestos coatings form attractive and high strength finishes on a variety of asbestos cement roofing, around cladding sheets and corrugated asbestos typically found on older commercial and industrial buildings. With appropriate cleaning regimes, these paints and coatings work with the asbestos to leave a dependable encapsulating finish.
Our roof coating systems are designed to waterproof, protect and decorate almost all types of roofing materials. Roof coatings are often the most cost effective way to renovate a roof by allowing the user to extend the life expectancy without the need of a specialist contractor.
However, often larger roofing projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to the roof will protect/waterproof the roof for an agreed period of time.
We offer systems that can be used year round to provide upto 5, 10, 15 and 25 years protection when applied by an approved contractor to flat, metal, pitched, felt, asbestos, corrugated roofs and more. Cold applied, seamless systems mean no need for heat or naked flames providing tough, elastomeric, waterproofing coatings that withstand thermal/structural movement.
We will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means that if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450