Sub-category links
Filter By
Classification
Classification
Product Type
Product Type
Fire Rating
Fire Rating
Suitable For Use On
Suitable For Use On
Application Method
Application Method
Colour
Colour
Astroflame fire stopping products include fireproof sealants, mastic, and fire resistant adhesives, intumescent fireproofing and fire stopping materials, fire barriers and fire collars, fire pillows and fire door seals.
Products listed below, which can be filtered using the desktop sidebar or mobile filter, are for use in walls, floors, ceilings, doors, ducts and other fire rated compartmentation structures for fire, air permeability, water permeability, acoustic isolation and structural movement.
There are 53 products.
Active filters
Astroflame Fire Rated Ceiling Air Valves provide fire protection in ceilings, activating when attacked by fire to prevent spread of smoke and flames for up to 60 minutes.Maintains the integrity of fire rated floor/ceiling construction for up to one hour Tested to BS1365-2:1999 Tested to BS5476: Part 20: 1987 Meets the requirements of...
Astroflame Intumescent Duct Sleeves are intended for use where a ventilation duct passes through a fire rated wall, maintaining the integrity of the fire rated wall which would otherwise be lost. In the event of a fire, the advanced Duct Sleeve will expand with the heat, crushing the duct and closing off the hole to the fire for at least 120...
Astroflame Clad Ventilated Fire Barriers prevent fire spread and provide compartmentalisation in the external façade. It is essential that the correct fire barriers are specified and installed, therefore in order to make a purchase you must fill in the application form by clicking on the button below. Our technical team will then contact you...
Astroflame Intumescent PFP Pipe Closers are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes. Can be used in gypsum, masonry and concrete walls and with concrete floors.CE Marked For pipe sizes from smallest pipes available to Ø315 mm with a wide range of pipe...
Astroflame Fire Rated Putty Pads & Cords, easy to apply fire and sound rated sealant supplied as a non-setting putty. The putty is hand workable, reusable and re-serviceable due to its non-setting properties. The putty is manufactured and supplied in different shapes and forms for different applications - sockets, fire sealing services and...
Astroflame Intumescent Acoustic Mastic, a one-part intumescent acrylic mastic for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures. Forms a char, preventing the passage of fire and smoke, when exposed to the heat of a fire.Tested around: metallic pipes, cable trays,...
Intumescent fire and smoke seals for fire door assemblies for fitting into a rebate to either the eaves or the frame of a door. In the event of a fire the seal expands (intumesces) to many times its original volume and seals the gap around the door to provide a safe and effective barrier against the passage of fire, smoke, and hot gases....
Astroflame Intumescent PFP FR Acrylic Sealant, designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors (including openings formed around building service penetrations); also maintains the acoustic design performance.Suitable for most surfaces, included concrete, masonry, steel, gypsum,...
Astroflame X-Series Intumescent Fire Pillows are designed to provide an effective fire barrier, on a temporary or permanent basis, for services which are subject to frequent changes or replacement. Pillows can be added, removed or rearranged in an aperture to accommodate to the needs of the situation and have been tested with metallic pipes,...
Astroflame Fire & Acoustic Internal Socket Box Inserts are used to restore the fire rating of a wall otherwise compromised by apertures and gaps following the fitting of socket boxes, also restoring acoustic and thermal performance of the wall and its air-tightness.Easy to install putty pad alternative Single and Double socket sizes...
Astroflame Intumescent Expansion Joint/Linear Gap Seals, an elastomeric foam laminated with a graphite-based, intumescent compound on both sides. Designed to perform as a fire barrier in construction movement joints, when tested to BS 476 Part 20: 1987. Designed for long linear joint installations in both horizontal and vertical applications...
Astroflame Flexiseal is an ultra thin and flexible high performance intumescent sheet. At 0.8mm Astroflame Flexiseal offers high levels of expansion and insulation preventing heat transfer on ironmongery rebated into timber doorsets. All ironmongery installed on a fire door must be fitted without compromising the integrity of the complete...
Sub-category links
Filter By
Classification
Classification
Product Type
Product Type
Fire Rating
Fire Rating
Suitable For Use On
Suitable For Use On
Application Method
Application Method
Colour
Colour
Astroflame are one of the UK's leading manufacturers of passive fire stopping products, suppling high performance market leading Built in Fire Protection Systems and Construction Products to protect life and property around the globe. Rawlins Paints stock the full Astroflame range of fire stopping components, used to protect the weak points of a building which would otherwise allow the free and uncontrolled passage of fire, smoke and fumes.
