Home » Workplace & Commercial » Fire Protection » Fire Resistant Products: Everything You Need to Know

Fire Resistant Products: Everything You Need to Know

Fire retardant paints are most frequently used to provide fire resistance in large scale industrial spaces, public buildings and facilities, or on new builds. They can also be used on smaller DIY projects, but not for those tasks that simply require heat resistant paint, like BBQs and exhaust pipes. Rawlins Paints is one of the UK’s largest stockists of fire resistant paints and coatings.

Fire resistant materials and products at Rawlins Paints

Fire protection products, including many of those available at Rawlins Paints, provide an estimated period of fire resistance to substrates, structural components, and objects. International laws vary per product and system, with some requiring multiple test requirements. If critical areas’ fire resistant environmental and structural systems and conditions are not met, it may not be eligible for a fire-resistance rating or fire certification.

Whether you’re looking to comply with safety legislation for your building (including using intumescent coatings on steel structures) or just want to make sure your home, café, restaurant, hotel, guesthouse, warehouse or office has an extra layer of fire protection, it’s important to make sure you’ve had an appropriate fire risk assessment. Once this is done, you’ll know the kind of measures you need to take and the best fire resistant products to use, from building with fire bricks, installing fire extinguishers or other passive fire stopping products, installing or upgrading doors to fire doors, choosing the appropriate intumescent paint to make sure you have fire retardant curtains, furnishings and fabrics inside.

Both the inside and the outside of the building must be fireproof to certain standards, depending on the building’s use. For example, a restaurant or pub kitchen that is likely to be surrounded by a large amount of wooden furniture and flammable materials, will need higher graded fire resistance than a standard household kitchen. Warehouses and businesses that supply, manufacture or store lots of industrial substances will again need a different type of fire retardant paints.

Warehouses, hospitals, surgeries and many other public buildings will also need an official fire escape plan, with clearly marked routes and safe meeting point. Don’t forget to include enough clear fire exit signs, as well as directions towards fire extinguishers and access to a fire blanket (particularly in industrial kitchen areas). Search for a fire risk assessment template to show you an exact list of what you need to take into consideration for fire safety.`

Fire retardant coatings and treatments

At Rawlins Paints, we have a variety of fire-retardant coatings and treatments in stock, which extend beyond walls and ceilings to fire resistant coatings and treatments for timber, metal, fabric and specialist door upgrade kits. We also sell intumescent strips for fire doors, so that you can ensure your door and its surrounds are fully insulated and fire proof. All our products are issued with a certificate of conformance and we’re always happy to discuss your requirements. Contact us if you’d like to find out more about any of the fire-retardant paints, varnishes, lacquers, coatings and treatments listed on our site.

Fire retardant paint

Fireproof paint products include intumescent paint for steel, water based fire retardants, kits to upgrade wooden doors to fire proof doors and much more.

For buildings that need to be kept at regulation standards, for example, blocks of flats, houses that are rented out, industrial kitchens, schools, hospitals etc., fire proof paints need to be used. All fire-resistant paints are developed to meet certain levels of fire protection. Depending on the substrate they need to be applied to and the environment and needs of the project, fire retardant paints have various levels of protection. These include 30, 60, 90 and 120-minute fire resistance, which means if the wall, door, ceiling or floor has been treated properly, the extra layer applied will protect the surface for an extra 30, 60, 90 or 120 minutes. These exceed the general British Standard Class 0 and Class 1 fire rating protection.

If you’re looking to upgrade the fire-resistant level of your interiors, then it’s very possible to do this without a professional painter or fire paint expert. We have easy to use, water-based fire proof paints for wood that you can simply apply yourself. These include kits to upgrade your doors to fire doors, all with full instructions, white undercoat paint and primer.

You can then use your own choice of topcoat to make sure you end up with a finish that suits your space, and doesn’t compromise on quality or fire protection.

Clean and simple fire retardant paints

Fire retardant spray

Airless sprayers are often used by professional painters and decorators, but you don’t have to be a professional to use a paint sprayer to apply fire resistant paint. Many of our paints, including flame retardant sprays from Bollom can be applied in this way. Spray painting fire resistant paint has the added advantage of covering large surfaces much faster. It’s often not appropriate if you are looking to upgrade the fire resistance of a relatively small area, so it’s probably best to stick to a roller or brush in those circumstances.

Spray painting is excellent for large areas that need the same level of fire protection coating, such as industrial kitchens, hospital walls and floors, warehouse surfaces inside and outside, and can be the best choice for those kinds of projects. It’s much faster and ensures an even coverage of whichever coating you choose. We have experts ready to advise you on the best method of application for your specific project, from fire retardant spray for timber to flame retardant topcoats, so get in touch if you’d like to discuss this further.

Flame retardant varnish

If you want to keep the beautiful, natural quality of your timber then fire retardant varnish could be your best bet. As this provides the same flame-protection standards as the fire proof timber paint, but retains a clear finish, established coatings, natural wood or wood stains will still show through. In fact, you won’t be able to tell that the varnish is fire resistant, so the focus can remain on the aesthetics of your surfaces.

Using fire retardant varnish on timber structures

Intumescent paint colours for steel

As well as protecting from the danger of fire, intumescent paints can be used to give a beautiful finish on steelwork. There are different finishes available, depending on the required look. A high quality waterborne intumescent paint will give you a 30 or 60-minute level of fire resistance using just a few coats. A compatible anti-corrosion primer should be used prior to applying the intumescent paint.

You can use either a gloss finish, which not only looks great but is also easy to clean and very hardwearing. Alternatively, an acrylic eggshell paint can be used with an intumescent base coat, which will give you a subtler finish than a gloss, with all the fire protection you need. Finally, you could opt for a vinyl matt finish, although this isn’t as easy to clean and isn’t quite as hardwearing as the other paints.

Brands

Specialist fire retardant paint brands stocked at Rawlins Paints include an in-house specialist set of products, 3M, Bollom, Crown Trade (Timinox), International, Jotun (Steelmaster), Sika, Thermoguard and Zeroflame. If you cannot find the specific product you require, please contact us and we will be able to offer a suitable alternative, or track down your specific project needs.

Fire protection

We can supply fire resistant paints and products, including:

  • Protection for metal, timber, walls and ceilings, fabric, doors and more.
  • Interior and exterior systems.
  • Class 1, Class 0, 30, 60, 90 and 120-minute protection.
  • Wide range of topcoats to allow our systems to be finished in virtually any colour.
  • All our products meet British Standard requirements and are issued with a certificate of conformance (our products now also conform to most European standards too).

Our help and advice promise

Fire protection doesn’t have to be demanding work, let our technical staff help you get the level of protection you require and the finish you want. Whether it’s structural steel in a warehouse, fire retardant paint for wood on a new-build, or the internal walls of a block of flats, we can provide a full specification and offer guidance throughout the project.

7 comments

  1. Hi. Im looking to increase the firerating on internal walls to 1hr. Currently they are 1/2 hr. The current walls are 100mm timber stud with fibreglass insulation between the timber with 12.5mm gyproc fireline board on each side. Do u have a product that can be applied to the plasterboard to make it 1hr rating

  2. Hello,

    When we repaint the exterior wood shingle/shake, we would like to add a fire protection/resistance layer. The painter said the fire resistant paint will add a thick coat to cover the wood grains and texture. Is that true? Can we just add a clear finish/coat for fire protection without changing the natural look of the shingle wood? If so, which brand, product provide the best protection? Thanks!

    Helen

    • Hi Helen,

      Many thanks for your question..

      Providing your are needing to achieve a Class 1/0 level of fire protection and any existing finish can be removed back down to bare wood, then we would recommend Zeroflame Fire Retardant Treatment for this application to retain the natural finish of the timber. It can also be overcoated with a water based, non flammable topcoat of your choice once dry.

      If you are unable to remove any existing finish then we would recommend the Thermoguard Safewood Anti-Viral Fire Protection System. As it is a much thicker, intumescent paint, it would hide some grain and texture on the surface.

      Many thanks and I hope this helps.

      Please feel free to get in touch with any further questions.

      Many thanks
      Stuart

  3. Hi
    We have installed a mezzanine floor with steel columns and uprights with a 38mm chipboard floor which has a 30 minute fire protection, we require a minimum of 60 minute protection. Do you have a paint product that will provide our requirements?

    • Hi Andy,

      Thank you very much for getting in touch and for taking the time to read our blog. Our Technical Team will require some additional information regarding your project so that they can assist as accurately as possible. Please could you get in touch via our ‘Contact Us‘ page and they will be happy to help out.

      Many thanks and I hope this helps
      Stuart

Leave a Reply

Your email address will not be published. Required fields are marked *

*