Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Finish
Finish
Since the early 1960s, in the UK, Bondaglass has been a leading brand of polyester fillers for vehicle repair and polyester resins for laminating with glass fibre.
There are 33 products.
Active filters
Bonda FEW Fine Surface Filler is a two-component, polyester, very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing.Primarily used for surfacing work on other fillers Normally requires no primer before topcoat...
Bonda G4 Pond Sealer Clear is a moisture-cured polyurethane, which forms a non-porous seal on concrete, brick or porous stone. G4 uses the moisture in the air and substrate to cure or harden. It can be applied onto slightly damp substrates.Deep bonding plastic coating for concrete rendered ponds Seals concrete floors - Quick and easy to...
Bonda APW Soft Wax Mould Release Agent is a soft universal release wax that gives excellent release from a wide range of rigid mould compounds including plaster, Jesmonite, GRP, metal, wood, and glass.Made from a blend of soft waxes Can also be used to release polyurethane foams and casting materials from moulds that have intricate and...
Bonda Marine G4 Primer and Sealer performs a vital function as a primer when bonding fibreglass to wood, metal, and concrete.A tough yet flexible coating, that is hard wearing Bonds fibreglass to wood, metal, and concrete Hard wearing, non-porous flexible coatingProfessional use only - from the 24th August 2023, adequate training...
Bonda Easy Sand is a rapid hardening filler with soft sanding properties that provides a smooth surface.Used in the automotive industry for filling repairs with soft sanding properties Bonds well to metal, GRP (fibreglass) and wood Rapid hardening filler Provides a smooth surface that is easy to sand Pack includes hardener and...
Bonda Woodfill is a superior two component rapid hardening wood filler used to fill knots in timber, pin holes, defects etc.Easy to mix and apply Sands well to give an excellent base for finishingMore Information Delivery Info
Bonda Rust Primer is a resin-based zinc anti-rust coating treatment. It forms a tough skin with a bonded in anti-rust system for a long-term action. It has excellent adhesion to most metals and leaves a primed surface ready to paint with all types of paint.Stops rusting Fast drying Used to stop further corrosion Leaves a paintable...
Bonda Décor Fill Stryene Free is a two component stryene free multi-purpose filler for the decorator. Fills wood, metal, concrete, GRP.Stryene Free Multi-purpose filler Bonds strongly with a small filler particle size, to give a fine and dense finish Easy to use - Hardens rapidly Non tack surface - Easy to sand Also available - Bonda...
Bonda G4 Damp Seal is a moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp-proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins.Hard wearing Non-porous Quick and easy to apply Can be used...
Bonda G4 Pond Sealer Colours is a moisture-cured polyurethane, which forms a non-porous seal on concrete, brick or porous stone. G4 uses the moisture in the air and substrate to cure or harden.Please note: G4 Pond Sealer Colours must be applied over two coats of Bonda G4 Pond Sealer Clear Used in conjuction with G4 Damp Seal for coloured...
Bonda Décor Fill is a two component multi-purpose filler for the decorator. Easy to use - hardens rapidly - non tack surface - easy to sand. Fills wood, metal, concrete, GRP. Bonds strongly to metal, fibre glass, concrete, and wood with small filler particle size, to give a fine and dense finish.Multi-purpose filler Easy to use Hardens...
Bonda Bondafiller is a two-part, easy-to-use filler with good sanding properties that gives a smooth, dense surface. Used in the automotive industry for filling purposes Smooth, dense surface Repairs holes, scratches and dents For interior and exterior use Bonds strongly to metal, fibre glass and wood Takes all types of paint Two...
Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Finish
Finish
