Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 44 products.
Active filters
Fosroc Cebex 100 is an expanding and plasticising powder admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. Cebex 100 is a suitable pre-stressing grout admixture when complying with BS 8110...
£7.91 (incl. VAT)
£6.59 (ex. VAT)
Fosroc Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. For use as a spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
£179.14 (incl. VAT)
£149.28 (ex. VAT)
Fosroc Conplast UW is an underwater concrete admixture used to minimise washout of concrete placed underwater. When added to concrete, Conplast UW produces a gel in the water phase which surrounds the cement particles and other fine components of the concrete mix and protects them from excessive washout both during placement and once the...
£235.42 (incl. VAT)
£196.18 (ex. VAT)
Fosroc Cure B is a spray on temporary curing membrane to retain moisture in freshly placed concrete.Ideal for use as a spray applied membrane to retain moisture in concrete for effective curing Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
£141.31 (incl. VAT)
£117.76 (ex. VAT)
Fosroc Nitobond AR is a single component polymer emulsion and recommended primer for the Renderoc cementitious repair systems.Nitobond AR can be used as a curing membrane and also a concrete surface sealer in non-traffic areas May also be used as an economical dust proofer and surface sealer for non-trafficked cementitious surfaces...
£158.08 (incl. VAT)
£131.73 (ex. VAT)
Fosroc Nitobond EP is a 100% solids solvent-free epoxy resin containing pigments and fine filler. Used for bonding new cementitious mortars and screeds including Patchroc GP and Paveroc to existing cementitious surfaces.Ideal for extensions and repairs to concrete in factories, loading bays, trucking aisles, bridges, roads, bonded or...
£124.76 (incl. VAT)
£103.97 (ex. VAT)
Fosroc Nitobond SBR is a modified styrene butadiene rubber emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries.For improving and bonding concrete repair mortars, floor toppings and screeds, waterproof renders and cementitious slurries Being...
£110.14 (incl. VAT)
£91.78 (ex. VAT)
Fosroc Resivit is a liquid admixture which is added to mortars and concrete during production in order to accelerate their setting and hardening to quickly attain increased mechanical resistance.Complies with BS EN 934-2, BS 5075 Part 1 and with ASTM C494 Type C Acts as a catalyst in the initial hydration reactions of the cement,...
Parex 751 Lankolatex is a white liquid admixture used for a range of key coat preparations, bonding and waterproofing coats and which significantly improves the performance of mortars and concrete.Waterproofs renders and mortars and improves resistance to oils, grease, fuel and dilute acids Lowers the modulus of elasticity and improves...
£266.83 (incl. VAT)
£222.36 (ex. VAT)
Parex Monaccel Plus is an admixture used to reduce the initial setting time of one-coat renders and other general mortars.Liquid additive accelerator used to reduce the waiting time required before scraping one-coat renders during cold weather Dispersed directly into the mixing waterPlease Note: This product is made to order subject...
£104.92 (incl. VAT)
£87.43 (ex. VAT)
Parex Micro Gobetis 3000 is a pink coloured liquid with a high granular consistency for ease of application recognition, and to provide excellent bonding characteristics. The product is designed to control suction to high absorption or low porosity substrates and improves the adhesion for one coat render systems. For external and internal use...
£70.03 (incl. VAT)
£58.36 (ex. VAT)
Parex Fixopierre is a water vapour-permeable and microporous substrate porosity regulator and key coat admixture, particularly suitable for lime or earth based substrates where high breathability of the substrate is required or where a high absorption substrate is expected.Improves the adhesion of façade renders by reducing the risk of the...
£89.89 (incl. VAT)
£74.91 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
