List of products by brand Bradite
Bradite Paints and Coatings are now available to buy at Rawlins Paints (official UK stockists), with full technical support available across the full range. If you require any sales, application, storage, or technical assistance, please contact us on 0113 245 5450.
Bradite's range of specialist paints and coatings include:
- Floor Paints
- Adhesion Promoters
- Thinners and Solvents
- Cleaning Liquids
- Protective Coatings
Showing 1-12 of 35 item(s)
Removes excess lime from power floated or very smooth concrete floors, this Acid Etch from Bradite is an ideal pre-treatment for concrete surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Pre-treatment for concrete surfaces
Removes excess lime from power floated or very smooth concrete floor...
A high performance two pack epoxy solvent based barrier primer for ferrous and non-ferrous metals, providing outstanding adhesion and excellent corrosion protection. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Suitable as a primer for a wide range of coatings
Can be used in immersion conditions
Conforms with...
Provides a tough hard-wearing film over steel, non-ferrous metals, concrete, asphalt and more. Supplied in black, Bradite Bitumen Coat/Finish will bring superb water-repellent properties to the substrate.
Advantages
Only one coat required
High build coating
Confirms to BS 3416 and BS 6949, Type 1 Class A
A high performance single pack chlorinated rubber gloss finish with excellent chemical & water resistance. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Resistant to fungal growth
Highly resistant to oils and chemicals
Ideal for water immersion, such as swimming pools
A unique single pack water thinned polyurethane acrylic finish for long lasting protection of exterior cladding elevations. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Advantages
For use on steel structures and cladding, plastisol and PVF2
Suitable for both wall and roof areas
No...
A high performance two-pack polyurethane finish for exterior cladding renovation. Suitable for use over most existing cleaned and prepared cladding coating systems with minimal preparation. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Tough and hard-wearing
Cures at low temperatures
Excellent colour retention...
A high performance single pack chlorinated rubber anti-corrosive primer with excellent chemical & water resistance. Dries quick and for application on to suitably prepared ferrous metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Contains zinc phosphate
Excellent acid and alkali chemical resistance
Can be used...
A tough and hard-wearing two-pack epoxy coating with water and chemical resistance. Ideal for use in refurbishing fibreglass swimming pools. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems
Advantages
Resistance to heavy traffic and chemicals
Ideal for water immersion
Surface dry in 3...
A high performance direct-to-metal silicone/polyurethane alkyd finish. Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
Advantages
Outstanding application properties
Excellent exterior...
A high build fast drying modified alkyd primer for use on ferrous metals. Ideal for priming in industrial and factory environments. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
Advantages
Can be applied up to 75-100 microns
Protects against corrosion on properly prepared steel
Dries quick
A fast drying modified alkyd anti-corrosive primer for use as a general-use fast drying prefabrication or system primer on properly prepared ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
Advantages
Protects against corrosion on properly prepared steel
Pigmented with zinc phosphate
Touch dry in as little as an...
A high performance single pack water based rust converter for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Converts low level corrosion to an inert substrate for painting
Suitable for...
