Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
High performing, specialist cleaners and degreasers for preparing surfaces prior to painting. Get the best out of your paint job with our floor cleaners and degreasers, acid etch solutions, cladding wash, fungicidal solutions, oil removers, and more. Preparation is one of the most important stages of the painting process and unfortunately its often the stage people spend the least time on. The better prepared your cladding, roofing, PVC doors and windows, flooring, or interior surfaces, the longer your paint will last. Browse our range today and call 0113 2455450 should you require any help or advice.
There are 108 products.
Active filters
Rust-Oleum 2901 Epoxyshield Cleaner/Degreaser for floors is a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution.Removes grease, oil and other contaminations Virtually odour free Non-flammable 6-8 m²/l coverageMore Information Delivery Info
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...
Teamac Mordant Solution (T Wash), is a pre-treatment for new galvanised steel to ensure adhesion of subsequent coatings. Satisfactory treatment will be shown by a colour change to dark grey throughout the whole surface. AdvantagesApplication: Brush, Dip, Roller Coverage: 40 Square Metres Per Litre Suitable For: Galvanised Metal...
Approved by the National Residential Landlords Association (NRLA), destroys mould or fungi, sterilising prepared surfaces prior to the application of Glixtone Fungi-Shield Paint. Ideal for any internal areas that are susceptible to mould or organic growth including: walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms and...
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside.Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
A xylene based solvent for bare or painted concrete to help with cleaning and preparation.Ensures thorough adhesion of self-adhesive Watco Safety Tapes and Treads Use to thin Watco solvent based, including polyaspartic products Removes dirt and dust prior to painting Cleans paint spills and application toolsMore Information...
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties. Product FeaturesDegreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting. Part of the cleaning process. Essential for a good finish. Can also be used as a...
Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. Used to prepare new and smoothed concrete. Product DetailsRemoves laitance from concrete/render Removes salts from concrete/render Can be used as a degreaser Removes patches of oil...
Fluxaf Power Clean is a powerful ready to use alkaline cleaner and degreaser. Based on a range of solvents and surfactants.It is designed to remove tough stains in seconds from practically all hard surfaces Biodegradable Suitable for removal of chewing gum, labels, tape residue, smoke damage, printers` ink, mildews stains, scuff marks,...
Dual action formula cleans and prepares bare concrete prior to painting.Use on old and new concrete, inside or outside Etches bare concrete to promote adhesion of paint finishes Removes dirt and light oil deposits Removes cement deposits from new concrete to ensure good paint adhesion Reduces alkalinity of new concrete – essential...
A water based, environmentally friendly powerful cleaner for use on floors, walls and other hard surfaces. Used to degrease and remove oil patches from the surface prior to acid etching or painting.Rapidly releases heavy oils, hydrocarbons and ground-in dirt from surfaces such as concrete, brick and breezeblock Used to deep clean floor...
Tremco AW421 Industrial Cleaner is a powerful solvent-based cleaning solution for dissolving and removing mastics, adhesives and sealants. AW421 will remove many common adhesives and sealants, particularly in the uncured state. The product may also be used for cleaning and to degrease other surfaces that are not sensitive to solvents, such as...
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
