Need Help?

Cold Temperature Primers

Cold Temperature Primers from Rawlins Paints enable earlier access onto new concrete substrates, speeding up applications of screeds, paints, coatings and other floor coverings when applied in cold temperatures, ensuring essential new builds and refurbishment work can continue over winter.

Our Technical Support Team are on hand to advise on the best solution for your needs - contact them on 0113 2455450 (option 2) or send a message to [email protected].

There are 9 products.

Sort by:

Showing 1-9 of 9 item(s)

5KG Pack

401 WG Epoxy Floor Primer

401 WG Epoxy Floor Primer is a fast curing, two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Designed be used in lower temperatures or when rapid overcoating/access is required. Excellent adhesion to...

£91.20 (ex. VAT)

In Stock and Available for Delivery

5KG Pack

402 WG Damp Proof Coating

402 WG Damp Proof Coating has been developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required. Also available in 4,000+ colour...

£105.00 (ex. VAT)

In Stock and Available for Delivery

5KG Pack

402 WG Damp Proof Coating - Special Colours

402 WG Damp Proof Coating has been developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required. Available in 4,400+ colours, inc....

£105.00 (ex. VAT)

In Stock and Available for Delivery

Watco Polyaspartic Primer

Watco Polyaspartic Primer

Primes and seals porous, dusty floors prior to painting, for use with Watco specialist polyaspartic coatings. Primes and seals porous, dusty floors prior to painting Can be used at -10°C to +25°C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Use with the following Watco products: Cold...

£115.80 (ex. VAT)

In Stock and Available for Delivery

Fosroc Nitodek FS Primer

Fosroc Nitodek FS Primer

Nitodek FS Primer is a transparent, solvent-free, 2-component methacrylic resin that cures rapidly, even at low temperatures, on steel and new and existing concrete surfaces. Part of the Nitodek FS system Fast setting allows for quick over-coating Easy to apply Suitable for priming vertical and absorbent substrates Seamless Solvent...

£460.32 (ex. VAT)

In Stock and Available for Delivery

Watco Tack Coat

Watco Tack Coat

High strength 100% solids epoxy resin adhesive primer, with sub-zero option for use at low temperatures. For use with Watco Concrex Makes shallow or intricate repairs easier Overcoat in 30-60 minutes Cures at 0°C Suitable for use on concrete and metal Note: While great care is taken with the colour samples shown, no guarantee can...

£29.01 (ex. VAT)

In Stock and Available for Delivery

Watco Tack Coat Sub Zero

Watco Tack Coat Sub Zero

A polyaspartic resin primer for use at low temperatures. Use inside or out with Concrex Epoxy Floor Repair Mortar Helps with essential floor repairs during the winter months Suitable for chiller room floors, concrete, stone, or render Primer is ready for repair mortar in less than an hour Note: While great care is taken with the...

£36.84 (ex. VAT)

In Stock and Available for Delivery

Hitex HT Adhesion Primer

Hitex HT Adhesion Primer

HT Primer is a clear liquid tack coat primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. HT Primer is an easy to apply, low viscosity, colourless liquid tack coat primer. The use of HT Primer with Hitex thermoplastic markings is strongly recommended on any substrate that may prove...

£37.50 (ex. VAT)

In Stock and Available for Delivery

Hitex HiTack Primer

Hitex HiTack Primer

A clear aerosol spray primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. HiTack Primer is an easy to apply, colourless aerosol spray tack coat primer. The use of HiTack Primer with Hitex thermoplastic markings is strongly recommended on any substrate that may prove difficult for...

£10.50 (ex. VAT)

In Stock and Available for Delivery

Need Help?

Need Help?