Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Over 4,200 colour options, including RAL, BS, NCS and Pearl/Metallic colours - Colours mixed in gloss on a TR base in 2.5L, and Satin WH base 1L are temporarily...
Rust-Oleum CombiColor is the UK's leading direct to metal paint, which can be applied directly to rust and aged metal, offering longer-lasting protection on both interior and exterior surfaces. CombiColor will remain flexible under most conditions, without cracking or flaking when bent. Its sag resistant properties mean that you can apply any one of the hundreds of CombiColor colours without worrying about brush strokes and streaks. So, when you need a reliable, durable, low-odour, one-coat maintenance system for metal, look no further than Rust-Oleum CombiColor, available in matt, satin and gloss, in the widest colour selection available online, at Rawlins Paints.
Rust-Oleum CombiColor Multi-Surface is a solvent-based, adhesive primer and topcoat in one. Based on an alkyd binder it provides good adhesion to many types of substrates and is lead and chromate free. Please Note - Colours mixed on a WL base in a 1L gloss finish are temporarily unavailable. If the colour you require is unavailable in this...
Rust-Oleum CombiColor Original Aerosols are a one coat maintenance aerosol paint by Rust-Oleum for metal with superior metal protection, even direct to rust. Ideal for small maintenance and touch-up jobs. High coverage: 10.5 m² per litre Sag resistant, no brush strokes White spirit dilutable Usable down to 5°C More Information...
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is a high quality anti-rust primer for Rust-Oleum CombiColor. The Anti-Corrosion Primer will ensure an even longer anti-rust protection on new or rusted steel surfaces and provides and enhances protection against corrosion. Recoatable after 2 hours For new / slightly rusted surfaces Grey for...
Rust-Oleum 7301 CombiColor Thinner is a special thinner for Rust-Oleum CombiColor. Although thinning of Rust-Oleum CombiColor is not necessary for spraying, if required it is advised to use Rust-Oleum 7301 CombiColor Thinner. Easy to pour Reclosable packaging Ideal for cleaning/degreasing of surfaces and equipment More Information...
CombiColor metal paint prices will vary dependent on finish, container size and colour, with all variants available for next day delivery across the UK. For cost-effective solutions, the full CombiColor range offers an unbeatable selection of options to meet your internal and external, from fence post to uPVC colour matching needs, including direct to metal standard gloss, satin and matt finishes, along with CombiColor Multi-Surface paint, specialist Hammertone and Wrought Iron finishes, and Rust-Oleum's CombiColor Aerosol range. Previously these products were located within different categories on Rawlins Paints, but now we have compiled them into their own category so that you can pick your combination with ease on mobile devices!
CombiColor Direct to Metal Paint - Covers Rust
CombiColor metal paint can transform aged, worn and rusted surfaces in minutes, offering a durable coating that is weatherproofing and can be applied in temperatures as low as 5°C. CombiColor can also be used on wood, acting as a primer and topcoat in one.
It is recommended that CombiColor metal paint is applied on bare and manually de-rusted metal surfaces, or with the prior application of CombiPrimer Anti-Corrosion 3369/3380.
|Drying times||20°C/50% r.h.||10°C/60% r.h.||30°C/50% r.h.|
|To touch:||2 hours||3 hours||1 ½ hours|
|To handle:||8 hours||16 hours||6 hours|
|To recoat:||After 16 hours||After 24 hours||After 8 hours|
|Full hardness||7 days||14 days||5 days|
Heat resistance: 90°C (dry heat), at elevated temperatures discoloration may occur.
Prior to application, remove any dirt, grease, oil and other surface contamination with a cleaner/degreaser. Manually remove loose rust and deteriorated paint by scraping and wire brushing. Finally, sand existing glossy paint to ensure good adhesion. The surface should be clean and dry before application of the coating.