Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. See further below for representations of available translucent wood stains - these are shown in the colour picker as solid colours Certificate Application
Thermoguard Fire Varnish 30 and 60 Minute System is a clear intumescent varnish for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Fire Varnish Basecoat) and topcoat (Thermoguard Fire Varnish Overcoat (Interior) or Thermoguard Fire Varnish Overcoat (Exterior)) to ensure protection is achieved inline...
Zeroflame Fire Retardant Treatment is for use on wood and timber: Soaks virtually ‘invisibly’ into woods and timber Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers Can be overcoated for decorative purposes For internal and external use Simple Certification Application following...
Rust-Oleum 5478 Asphalt Restorer makes old and faded asphalt and tarmac surfaces look like new again, with a single application for driveways, car-parks and paths to provide a refreshed appearance and avoiding resurfacing costs. 20% OFF - LIMITED TIME ONLY Covers line markings and repair work Quick drying, cost effective, and easy to...
For industrial use, Sikafloor® paint systems can meet stringent demands of the most rigorous environments and floor dimensions, and has been used in some of the UK’s largest factories, installations and public attractions. Specially formulated for many types of industrial applications, Sikafloor paint systems can also be found internally and externally at commercial and domestic premises.
Rawlins Paints is one of the UK’s leading distributors of Sika products, including Sikafloor (Sikafloor Comfort and Sikafloor CureHard), Sika FloorJoint, waterproofing, concrete repair and quick fixing mortars, Sika MonoTop, and Sikagard.
Sikafloor EpoCem Module is a solvent free, two-component, water based, epoxy resin primer for the Sika EpoCem range of products. It is suitable for use in hot and tropical climates. Excellent bonding promoter on cementitious and other mineral based substrates, supplied in pre-measured packs and can be applied to damp substrates. More...
Sikafloor 155 WN is a 2-part water based epoxy resin primer. Can be used as a primer and adhesion promoter on properly prepared concrete and cementious screeds, as well as a primer for other Sikafloor products. Features and Benefits Easy and fast to apply Especially suitable for highly absorbent substrates Water dispersed and odourless...
Sikafloor 81 EpoCem is a three part cement and epoxy combination mortar from Sikafloor for self-smoothing floor screeds of 1.5 to 3mm. Use as a Temporary Moisture Barrier (TMB) or under Epoxy, Polyurethane and PMMA resin floors, over high moisture content substrates, even green concrete. More Information **Available for delivery - see...
Sikafloor 406 is a one part, clear aliphatic, solvent containing, UV resistant, moisture triggered curing polyurethane resin binder used as binder for the “Quartz finish” of the Sika Balcony Premium System. Features and Benefits Moisture triggered Water vapour permeable UV resistant, non-yellowing Weather resistant Abrasion resistant...
Sikafloor 416 is a one component, aliphatic, moisture triggered polyurethane that provides a tough, hard finish clear coat for the Sika Balcony Premium and Sika Balcony Fast Cure 1 Systems. Features & Benefits Moisture triggered UV resistant, non-yellowing Weather resistant Abrasion resistant Easy cleanable More Information...
Sikafloor Comfort Porefiller is a 2-part, total solids, low VOC, PUR used as part of the Sika ComfortFloor Pro and Sika ComfortFloor Decorative Pro System that is a durable high quality compound used for sealing and levelling of the permeable surface of prefabricated Regupol rubber sheets. Features and Benefits: Good bonding properties...
Sikafloor 305 W is a two part, low VOC PUR coloured matt seal coat that is part of the Sika ComfortFloor and Sika ComfortFloor Pro systems. Features and Benefits Water-based Very low odour Good UV resistance Non-yellowing Easy to clean More Information **Available for delivery - see Delivery Options below**
Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes. Features & Benefits...
Sikafloor 3000 is a two-part elastic, aliphatic, solvent free, very low VOC emission certified, self-smoothing polyurethane resin, which is part of the Sika ComfortFloor range. Elastic smooth wearing course for Sika Comfortfloor range, particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan...
Sikafloor 420 is a one part, elastic, low solvent containing, low odour, UV resistant, coloured, moisture triggered polyurethane resin coating. Used as a smooth or slip resistant, UV resistant, waterproof, abrasion resistant coating for concrete and cementitious screed substrates. For light to medium mechanical exposure on balconies,...
Sikafloor 320 is a two part, solvent free, low VOC emission certified, elastic, self-smoothing polyurethane base layer resin providing acoustic insulation. This product may only be used by experienced professionals. Features and Benefits Very low VOC emission Solvent free Comfortable Footwarm Reduces footfall sound and contact noise...
Sikafloor 330 is a two part, solvent free, very low VOC emission certified, elastic, self-smoothing PUR resin that is an elastic smooth wearing course as part of the Sika ComfortFloor and Sika ComfortFloor Pro systems. Features and Benefits: Very low VOC emission Solvent free Permanently elastic (crack bridging) Good mechanical...
Sikafloor paint systems are renowned for their high performance, durability, aesthetic and decorative qualities – even for high-end purposes which require a heavy-duty floor paint for pedestrian and light vehicular use.
What Sikafloor Can Offer You
Sika is one of the world’s leading manufacturers in the industrial flooring market, thanks to its high-performance technology and product range featured here at Rawlins Paints. With practical and robust flooring solutions that meet high-end decorative and high-performance commercial and industrial sector requirements, these innovative products are designed for:
- Warehouse, workshop and factory floors
- Retail properties – supermarkets, shopping centres, and wholesale markets
- Showroom facilities
- Storage facilities
- Residential areas
- Multi-storey carparks
- Production and manufacturing plants
- Clean rooms, hospital wards, doctor’s surgeries, medicinal facilities
- Art galleries, museums, exhibition spaces
- Schools, colleges and universities – classrooms, gymnasiums, science laboratories, lecture auditoriums
With the perfect balance of function and aesthetics, and a wide range of bespoke colours, there are unlimited design options for any customer and any business.
Eventualities and qualities that Sika floor paints and products can offer you, are:
- Abrasion resistance
- Chemical resistant
- Crack bridging properties
- Decorative and creative floor finishes
- Easy to clean
- Environmentally friendly
- Fast curing
- High-humidity tolerance
- High-performance and ultra-durable
- Hygienic - meets the needs of NHS Legislation
- Low odours
- Low temperature application
- Low VOC emissions
- Noise reduction and improved acoustics
- Smooth or textured floor finishes
- Under-foot comfort
Flooring is arguably the most essential part of the daily functionality of any business, and these Sika floor paints offer fast installation – meaning minimal downtime for any business.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450