The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Concrete Floor Repairs
Concrete and concrete floor repairs primarily target cracks, impact or abrasion damage, and discolouration from oils, harsh chemicals, or excessive UV exposure. Rawlins Paints stock a wide range of concrete floor repair products, including resurfacing floor screeds, self levelling compounds, slurries, and waterproof primers and sealers. Surface preparation is key to any successful repair and concrete renovation project, so we urge you to buy the leading surface cleaners to accompany the repair products listed in this category. If you are unsure which products will deliver the best, long-lasting results for your repair requirements, contact a member of our technical support team on 0113 245 5450.
From Sika to Rust-Oleum, we stock the UK's leading mortars, waterproofing concrete systems, crack repair fillers (and informative blog posts for concrete repairs), and waterproofing heavy duty floor paints for concrete. So, from the first sign of concrete damage to the finished sheen on a newly coated floor, trust Rawlins Paints to be there at every step of your repair or maintenance project with the highest quality products and leading application and technical support.
- Brand: Rust-Oleum
Rust-Oleum 5150 Speed Patch is a fast setting, high strength concrete repair mortar provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, coving etc. Strong and quick repair of concrete Can be recoated within hours Does not shrink or crack Can be drilled after curing Easy all-in-1...
Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors. Features and Benefits Virtually indestructable Heavy traffic friendly Chemical resistant Does not shrink or crack Easy all-in-one packaging Interior/Exterior use No primer...
Rust-Oleum 5190 Epoxy Repair Mortar Deep Fill is a very strong epoxy repair mortar for quick and economical repair of deep holes in concrete floors. Stronger than concrete! Economical repair of deep holes in concrete floors Stands up to heavy traffic and many chemicals Does not shrink or crack Easy all-in-1 packaging For indoor and...
Rust-Oleum Epoxyshield Concrete Repair Mortar is for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork: Just add water, stir and its ready for use Light traffic possible after 24 hours (at 20°C) To recoat after 48 hours Sandable to a smooth finish For horizontal and...
Rust-Oleum Speed Patch Pourable Grade is a quick setting, pourable repair mortar that is ideal for patch repairs for heavily trafficked floors. Accepts heavy traffic 2 hours after application Easy to prepare: add water and mix Possible to apply on slightly wet concrete Sets at low temperatures (5°C) For deep or shallow repairs
Always refer to product datasheets and brochures to check whether a product can be used on internal or external concrete.
Concrete damage can occur from a wide range of reasons - some more obvious than others:
- Impact damage
- UV exposure
- Chemical corrosion
- Water damage or infiltration
- Structural damage
- Compression stress
- And more
Concrete repair mortars, screeds, fillers, and coatings can be used on a wide variety of surfaces and situations, including:
- Roads, paths and patios
- Garage floors
- Processing plant floors
- Industrial environments where corrosive chemicals are used
- Storage facilities with regular medium to heavily trafficked floors
- New-builds and listed building restoration projects
- Sewage works
- Factory, warehouse, and shop floors
- And more
Rawlins Paints lists products that range from advised professional use only, to domestic and commercial products for ease-of-use and economic and cost-saving repairs:
- Mortars and screeds
- Fine crack and joint fillers
- Sealers and sealants
- Epoxy repair products
- Fast setting products
- Cold curing products
- Waterproofing, chemical and UV resistant products
- And more
Whether you are giving concrete a new lease of life, or repairing impact damage in an 'emergency', get the best prices on the leading products, only at Rawlins Paints.
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]
Download you Credit Agreement Trade Account Application Form here.