Concrete and concrete floor repairs primarily target cracks, impact or abrasion damage, and discolouration from oils, harsh chemicals, or excessive UV exposure. Rawlins Paints stock a wide range of concrete floor repair products, including resurfacing floor screeds, self levelling compounds, slurries, and waterproof primers and sealers. Surface preparation is key to any successful repair and concrete renovation project, so we urge you to buy the leading surface cleaners to accompany the repair products listed in this category. If you are unsure which products will deliver the best, long-lasting results for your repair requirements, contact a member of our technical support team on 0113 245 5450.
From Sika to Rust-Oleum, we stock the UK's leading mortars, waterproofing concrete systems, crack repair fillers (and informative blog posts for concrete repairs), and waterproofing heavy duty floor paints for concrete. So, from the first sign of concrete damage to the finished sheen on a newly coated floor, trust Rawlins Paints to be there at every step of your repair or maintenance project with the highest quality products and leading application and technical support.
Fosroc Auracast 200 is a cement admixture formulated using a unique combination of the latest generation of polycarboxylate polymers which act synergistically to outperform conventional superplasticisers. Specifically developed for the precast concrete industry coupling superior high range water reducing capabilities and excellent dispersion...
Fosroc Brushbond FLXIII is a two component, cementitious, polymer modified elastomeric waterproofing coating for concrete surfaces. Suitable for use on buried structures such as bridge abutments, culverts and retaining walls. Also for use on reinforced concrete roof decks, in conjunction with protective finishes. Brushbond FLXIII complies...
Fosroc Cebex 653 is a thixotropic stabiliser additive for cement grouts. Usage: It enables cement grouts to be used in moving water conditions. Designed for tunnel annulus grouting in soft ground or rock. Fosroc Cebex 653 can be used in marine environment contact with sea water. Please note: This product is Special order with a lead time of...
Fosroc Cebex 100 is an expanding and plasticising powder admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. Cebex 100 is a suitable pre-stressing grout admixture when complying with BS 8110...
Fosroc Cemtop GP is a polymer modified, cement based, floor levelling compound. Suitable for use as a general purpose self-levelling underlayment before the application of floor finishes such as tiles, carpet, vinyl or Fosroc Cemtop XD. Cemtop GP is also suitable as a floor finish for foot traffic or light commercial areas. Please also see...
Fosroc Cemtop XD is a polymer modified, cement based, floor levelling compound. For use as a heavy duty, highly abrasion resistant floor surfacing system. Suitable for industrial and commercial buildings, for new construction or refurbishment projects. Please also see the 'Uses' table in the Product Data Sheet. Fosroc Cemtop GP is also...
Fosroc Nitoprime 33 is the recommended primer for the Fosroc Cemtop range of cementitious self-levelling floor toppings applied to concrete and cementitious substrates. It is a water-based primer which seals the substrate preventing the release of air by the concrete that could form bubbles in the flooring compound. In addition, it “wets” the...
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
Fosroc Nitoseal MS300 is a one part, high modulus, damp tolerant, floor and pavement joint sealant based on hybrid silyl modified polyether technology. Suitable for use for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a...
Fosroc Colpor 200PF is a cold applied, high performance, pavement joint sealant conforming to the requirements of BS EN 14188-2:2004 and BS5212 Part1:1990.Suitable for use for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and...
Fosroc Conbextra BB is a non-shrink cementitious bridge bearing grout. Formulated specifically for grouting of bridge bearings and parapet post baseplates. Also used for grouting beneath flanged lighting columns. The dry powder is a blend of Portland cements, graded silica sands and additives to which only a controlled amount of clean water...
One part, low modulus sealant based on hybrid silyl modified polyether (“MS”) technology. Suitable for use for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.Applied to joints between 5mm and 35mm wideFor joint widths exceeding 35mm, please contact Rawlins...
Industrial environments where corrosive chemicals are used
Storage facilities with regular medium to heavily trafficked floors
New-builds and listed building restoration projects
Farms
Abattoirs
Sewage works
Factory, warehouse, and shop floors
Bridges
Tunnels
And more
Rawlins Paints lists products that range from advised professional use only, to domestic and commercial products for ease-of-use and economic and cost-saving repairs:
Mortars and screeds
Fine crack and joint fillers
Sealers and sealants
Epoxy repair products
Fast setting products
Cold curing products
Waterproofing, chemical and UV resistant products
And more
Whether you are giving concrete a new lease of life, or repairing impact damage in an 'emergency', get the best prices on the leading products, only at Rawlins Paints.