Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 231 products.
Active filters
Hempaxane Light 55030 is a two-component, high-solids, glossy, polysiloxane enamel with excellent gloss and colour retention.Isocyanate free glossy decorative and protective finishing coat for structures in severely corrosive atmospheric environment Service temperature - Maximum, dry exposure only: 120°CFor professional use only....
£261.00 (incl. VAT)
£217.50 (ex. VAT)
Hempathane Fast Dry 55750 is a 2-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate.Recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations May be specified as a one-coat direct-to-metal system in corrosive...
£67.06 (incl. VAT)
£55.88 (ex. VAT)
Hempinol 10220 is a physically drying, high-build, bituminous coating.For inexpensive short to medium-term anticorrosive protection of interior and exterior steelwork not exposed to direct sunlight. Not resistant to continuous mechanical stress EC-type examined as a low flame spread material when used as part of a predefined paint system...
£49.06 (incl. VAT)
£40.88 (ex. VAT)
Single pack solvent-based elastic coating for application at low temperatures and damp conditions.Ultimate corrosion protection - protects against cracking and peeling 7 colours available, including anthracite grey UV-and impact-resistant Primer and topcoat in one Excellent resistance against chemical agents in the atmosphere...
£160.38 (incl. VAT)
£133.65 (ex. VAT)
Axalta Modified Vinyl Primer/Finish (previously Stokes Modified Vinyl), a vinyl one coat anti-corrosive primer/finish for steelwork and galvanised steel where a one coat*, sheen primer/finish is required.Can be applied to degreased new galvanising without the need for an etch primer Use for gates, fences, street furniture and structural...
£84.61 (incl. VAT)
£70.51 (ex. VAT)
Two-component, high solids, high-build zinc phosphate polyurethane primer/finish.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Fast curing Specially designed for in-shop application Easy application by airless spray Unlimited recoatable Good adhesion to steel and galvanized steel Good resistance to...
£102.19 (incl. VAT)
£85.16 (ex. VAT)
Carboline Carbomastic 18 FC (replaces Nullifire PM018 Primer or Top Seal) is a two-component, fast-curing, heavy-duty, high-build anti-corrosive epoxy coating with a broad and versatile list of uses in marine and other corrosive environments. Please note: This item is Made To Order subject to a MOQ of 44 units and an extended lead time of 10...
£476.81 (incl. VAT)
£397.34 (ex. VAT)
Carboline Carbomastic 15 LT (replaces Nullifire PM015 Aluminium Epoxy Primer) is a two-component, high build coating with excellent adhesion to rusted steel and most aged coatings.Surface tolerant Recommended for painting over rusted steel where hand cleaning only is possible Carbomastic 15 LT penetrates through rust to steel substrate...
£119.09 (incl. VAT)
£99.24 (ex. VAT)
Carboline Carbothane 134 HP (replaces Nullifire TS134 Acrylic Polyurethane Top Seal) is a two-component, high-gloss, and high-solid polyurethane topcoat, which can be easily sprayed with conventional as well as airless equipment. The coating has excellent flow and application properties which provides a smooth, durable, and easy to clean...
£107.00 (incl. VAT)
£89.17 (ex. VAT)
Cromar Patination Oil is specially developed to reduce unsightly staining due to white carbonate and to impart a pleasing appearance to newly applied lead sheet and flashings.For professional use Specially formulated to provide a protective film coating enhancing the lead colour Suitable for all external applicational to lead‐work...
£79.02 (incl. VAT)
£65.85 (ex. VAT)
Cromar Acrypol Metal-Kote is an environmentally friendly, oil based 100% waterproof roof coating. It is specifically formulated for the protective coating or re‐coating of metal roofs, including those which may be suffering from the effects of corrosion.For Professional use Single-coat, no primer required - coats directly over surface...
£210.91 (incl. VAT)
£175.76 (ex. VAT)
HMG 1K DTM Gloss Colour is a single pack direct to metal compliant coating, giving good corrosion and early moisture resistance, ideal for application direct to metal as a single coat primer finish. For professional use Low odour and recoat at any stage, ready for use Suitable for most clean and degreased metal surfaces such as skips,...
£55.43 (incl. VAT)
£46.19 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
An all in one primer and topcoat, Rust-Oleum CombiColor is one of the best metal paints to prevent rust, giving years of protection and only takes minutes to apply. It can even be coated directly onto rust. Rust-Oleum CombiColor Hammertone adds in a different element with a hammered finish. This maintenance paint for metal gives great metal protection for the long-term. Check out the Rust-Oleum colour chart on each product for full colour options.
For an interior and exterior option, Rust-Oleum CombiColor Multi-Surface primer and topcoat is quick drying and solvent based. It can be used on lots of different surfaces, including uPVC doors and windows, MDF, metal, plastics, glass, masonry and more, and is a one coat paint.
Jotun Conseal Touch-Up is a quick drying acrylic coating. It can be used direct to metal and ends up with a matt finish. It’s ideal as a topcoat or a primer and is great for power plants, buildings, bridges and other industrial structures.
Specifically designed as an all round coating for new buildings where a particularly fast drying time is needed, Jotun Jotacote Universal N10 is a good all rounder. It can be used as a single coat system, or as a primer or midcoat.
If you have a surface that can’t be prepared to optimal levels or there’s no time for elaborate preparation, then Jotun Jotamastic 90 is a good choice. It’s abrasion resistant, a high build product and is tintable to a wide range of colours. Jotamastic 80 is in the same range and is a polyamine epoxy mastic coating. It’s suitable for carbon steel, if properly prepared, as well as aged coating surfaces and can be applied in freezing temperatures. It’s specifically designed for repair and maintenance and is used on outside hulls, exterior and interior areas within the Marine industry, as well as in offshore environments, power plants, buildings and general structural steel.
A specialist solution for metal that is exposed to severe and harsh environments, International Interzone 954 has two components and is low VOC. Interzone 954 is a modified epoxy barrier coating that only needs a single coat application but provides long term, effective protection. Its unique properties protect against mechanical damage, atmospheric corrosion and chemical attack. It’s mostly used for offshore metal rigs and maintenance and is formulated to withstand being submerged. It has also been found to be effective in other environments that can be corrosive and harsh, such as chemical plants and on jetties.
Another specialist product from International, Interseal 670HS is an epoxy maintenance coating. It is a two component high build epoxy, which means it’s suitable for lots of construction applications. It offers superior anti-corrosive protection and needs minimal surface preparation. It can be applied to lots of different substrates, including rusty steel and a wide range of aged coatings. When used with specific aggregate, Interseal 670HS can also be used as a non-slip deck coating.
