Filter By

Sherwin-Williams Acrolon C137V2

Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...

Price £71.95 Regular price £79.94
In stock

Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...

Price £58.12 Regular price £64.58
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £34.36 Regular price £38.18
In stock
All sale products

Need Help?

Electrical Consumer Unit Fire Protection

Electrical Consumer Units, switch and fuse boxes are expensive to replace if damaged by smoke and fire. Envirograf's fire protection system aims to starve flames of oxygen through expanding intumescent materials placed inside the units and around cable entry points, with extinguishing liquid that bursts open from pods when attacked, stopping flames from damaging the unit.

Since most fuse boxes are placed near the entrance of a building or near fire exits (closest to the point of entry for electrical cables), Envirograf's ECU Fire Protection System aims to contain a fire should one break out, allowing safe evacuation past it.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 4 products.

Showing 1-4 of 4 item(s)

Active filters

Envirograf Enviroburst Automatic Fire Suppression System

The Enviroburst Automatic Fire Suppression System is a liquid fire extinguishant for electrical consumer units, distribution or switch fuse & boards, bursting open when in contact with fire at 70°C to put out flames and prevent damage. Part of the Electrical Consumer Unit range See sizes below Easy to fix Supplied with fixing, nuts...

Price £17.88
In stock

Envirograf Electrical Consumer Unit Fusebox Fire Protection System

The Electrical Consumer Unit Fusebox Fire Protection System is a cover for consumer units, fuseboxes, and switches, with intumescent material that expands during fire to suffocate flames from air. Part of the Electrical Consumer Unit range Special sizes made to order Simply fits over a unit and fixes with screws Holes can be made for...

Price £296.18
In stock

Envirograf Electrical Unit Protection SLM Insulation Liner

Electrical Unit Protection SLM Insulation Liner for metal consumer units, preventing the metal case from becoming live due to loose connections. Part of the Electrical Consumer Unit range Easy to apply to new and existing units Silicone cloth material Multiple sizes available Can be cut or trimmed to size Sizes below

Price £3.02
In stock

Envirograf Electrical Unit Protection SCU Intumescent Strips and Sleeves

SCU Intumescent Strips and Sleeves seal cable entries in metal electrical consumer units. In the event of fire, the intumescent coating expands to seal off and contain flames and smoke within the unit. Part of the Electrical Consumer Unit range Easy to fit to new and existing units Adhesive-backed Available in a range of sizes Can be...

Price £3.43
In stock