Electrical Fire Stopping

Electrical devices can be fire hazards in themselves, and, whilst standards have improved, they are still liable to overheating or aiding the spread of fire through not being fire resistant. Using fireproof covers for downlighters and appliances in walls and ceilings helps the effectiveness of a fire barrier, preventing flames and smoke from penetrating through surfaces as quickly, giving more time for evacuation and potentially saving spaces from damage. Less damage means minimal downtime for businesses, smaller bills for renovation and a faster re-opening.

At Rawlins Paints we stock an extensive range of fire-stopping products designed for electrical applications; cable sleeves to help prevent combustion of cables and wires, melting in fire and spreading flames, whilst intumescent pillows and putty pads fit inside trunking and gaps around services to expand in fire and seal up any gaps to stop smoke and flames advancing. Gaskets for electrical sockets help restrain advancement of fire through plug sockets and fittings in plasterboard, and you can protect expensive Electrical Consumer Units and switch boxes from fire damage with our collection of fire-stopping accessories.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 26 products.

Showing 1-12 of 26 item(s)

Active filters

Nullifire FI025 Intuflex Wrap

Nullifire (Firetherm) FI025 Intuflex Wrap, an insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors.For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves Can be cut for better accommodation, if requiredMore Information...

Price £72.00 (ex. VAT)
In Stock and Available for Delivery

Nullifire FP333 Trunking Infill

Nullifire (Firetherm) FP333 Trunking Infill provide a permanent fire barrier within trunking boxes passing through fire compartment walls. They are of particular use where there are regular changes in cabling requiring frequent removal and replacement, for example in computer or communication installations.Up to 2 hours fire performance...

Price £3.49 (ex. VAT)
In Stock and Available for Delivery

Protecta FR Putty

Protecta FR Putty, fire protection putty pads (also known as firestopping gaskets) for reinstating fire ratings in electrical sockets, services and water supply boxes. Supplied as a non-setting putty with a low pressure intumescent for optimal fire protection. The putty is hand workable and easy to apply, re-useable and re-serviceable due to...

Price £34.80 (ex. VAT)
In Stock and Available for Delivery

Protecta FR Graphite Plate

Protecta FR Graphite Plate, preformed self-adhesive intumescent plates to reinstate the fire resistance performance of flexible wall constructions for up to 120 minutes when punctured with plastic wall boxes. Used where walls have been provided with apertures for the penetration of conduits and cables into socket boxes, on one or both sides of...

Price £9.15 (ex. VAT)
In Stock and Available for Delivery

Protecta Service Coating FR-1

Protecta Service Coating FR-1, a water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money.Can be used in combination with Protecta FR Board...

Price £45.73 (ex. VAT)
In Stock and Available for Delivery

Sika Firespan Intumescent Pads For Electrical Back Boxes

Sika Firespan Intumescent Ablative Pads, designed to be used on the inside or outside of electrical back boxes to maintain fire and smoke barrier where service holes are cut into dry lining and all types of fire rated boarding.Sika now offer a Fire Stopping Solution Finder - a useful tool when needing assistance on specifying fire...

Price £73.50 (ex. VAT)
In Stock and Available for Delivery

Tenmat FF130 Electrical Box Inserts

Designed to maintain the fire resistance performance of fire rated partition (stud) wall constructions where electrical back boxes have been installed.BS EN 1366-3 Fire Tested Fire Ratings of EI30, EI60, EI90 and EI120 Tested in Single Layer & Double Layer Partition Systems Tested in 75mm thick walls and greater Tested in “Twin...

Price £2.77 (ex. VAT)
In Stock and Available for Delivery

Tenmat FF109 Downlight Covers

Designed to reinstate the fire resistance performance of ceilings and/or floor joist constructions where downlighters have been installed.A fire rated product, reinstating ceiling fire protection up to 120 minutes Tested for minimal acoustic noise transfer, ideal for multi-home buildings Ventilated design – developed to reduce heat...

Price £16.77 (ex. VAT)
In Stock and Available for Delivery

Pyroplex Putty Pads For Electrical Boxes

Pyroplex Putty Pads, pre-cut ablative pads designed to reinstate the fire performance of compartment walls when penetrated by electrical outlets, providing a fast, efficient and clean method of achieving the required fire performance.Tested in accordance with BS EN 1364-1 Can be used in masonry and plasterboard partitions up to 120...

Price £5.16 (ex. VAT)
In Stock and Available for Delivery

Tenmat FF130 Luminaire Covers

Fire rated covers or fire canopies designed to fire rate recessed luminaire or fluorescent module fixtures and reinstate the performance of ceilings when penetrated by recessed lights. They help to maintain the fire protection performance of the element protected by the ceiling - preventing or delaying the spread of fire.60 Minutes Fire...

Price £51.82 (ex. VAT)
In Stock and Available for Delivery

Tenmat Loft Covers

Downlight protection covers that enable the safe installation of recessed downlights under loose or rolled loft/attic insulation.ECO Loft Insulation Compliant Tested to meet the CITB “General requirements and guidance for the installation of cold roof loft insulation” Meets Electrical Safety First recommendations IP6X Dust Tight Tested...

Price £16.36 (ex. VAT)
In Stock and Available for Delivery

Astroflame Intumescent Fire & Acoustic Socket Box Covers

Astroflame Intumescent Fire & Acoustic Socket Box Covers, a pre-formed socket / switch box cover to provide fire and acoustic protection as an easy fit alternative to conventional putty pads. This one-piece socket box is available in sizes to suit most common single & double electrical boxes and restores and maintain fire insulation...

Price £5.00 (ex. VAT)
In Stock and Available for Delivery