Filter By

Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only

Price £369.97 Regular price £411.08
In stock

Hydron Nu-Flame Fire Upgrade System (For Walls and Ceilings)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection. For interior use only. Pack comes complete with the Heat...

Price £329.81 Regular price £366.45
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Epoxy

There are 20 products.

Showing 1-12 of 20 item(s)

Active filters

PPG SigmaShield 2

SigmaShield 2, previous known as Amerlock 2 GF, is a two-component, high solids glass flake reinforced polyamine cured epoxy coating that is suitable for immersion. Designed for long-term protection at areas subject to heavy wear and tear, with excellent abrasion, corrosion and impact resistance. Low-temperature curing down to 0°C (32°F)...

Price £458.20
In stock

PPG SigmaShield 400

SigmaShield 400, formerley known as Amerlock 400 GF, is a two-component, high solids polyamine adduct cured epoxy coating, designed to prevent corrosion under insulation (CUI) of carbon steel and stainless steel. Glass flake reinforced for improved impact and abrasion resistance. Pass cryogenic cyclic test from -196°C (-321°F) to 200°C...

Price £303.00
In stock

PPG SigmaCover 2

SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...

Price £51.60
In stock

PPG SigmaCover 350

SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Surface tolerant primer/coating for use on steel and concrete Good impact and abrasion resistance, with excellent...

Price £37.56
In stock

PPG SigmaCover 350 LT

SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Surface tolerant primer/coating - Good impact and abrasion...

Price £356.80
In stock

PPG SigmaCover 400

SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...

Price £79.72
In stock

PPG SigmaCover 522

PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...

Price £36.18
In stock

PPG SigmaCover 805

PPG SigmaCover 805 is a two-component, high solids polyamine adduct cured epoxy coating for direct application to metal for excellent corrosion resistance and outstanding resistance to water and seawater. Very good surface wetting - Resistant to well-designed/controlled cathodic protection Good resistance against chemically polluted water...

Price £163.50
In stock

PPG SigmaShield 880

PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....

Price £243.00
In stock

HMG Epilife 2

HMG Epilife 2 (Base) is a 2K epoxy finish that has excellent application properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Epilife 2 Activator (Part 2) Option 1: HMG Hardener 9070 (2K hardener) Option 2: Hardener 9106 (semi gloss)...

Price £20.99
In stock

HMG Aquaguard 2

HMG Aquaguard 2 is a high quality water based 2K epoxy system. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Aquaguard 2 Activator (Part 2) HMG Hardener 9110 Part one of a two part pack Good long term...

Price £178.92
In stock

Tikkurila Temabond ST 300

Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation. Surface-tolerant with a wide colour range For steel and concrete surfaces Very good adhesion, even to hand-prepared steel Lower VOC...

Price £73.76
In stock