Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 35 products.
Active filters
Resichem 572 Concrete Seal CWC is a single component, engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which is...
£126.00 (incl. VAT)
£105.00 (ex. VAT)
Resichem 573 Fastfill Screed is a single component fast curing engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which...
£126.00 (incl. VAT)
£105.00 (ex. VAT)
Fosroc Nitomortar S is a solvent-free high strength, abrasion-resistant epoxy reinstatement mortar. Suitable for use for the fast and permanent reinstatement of concrete, particularly where high strength, abrasion-resistance and resistance to chemicals is required. The product is designed for horizontal use but can be applied vertically,...
£168.61 (incl. VAT)
£140.51 (ex. VAT)
For essential concrete floor repairs during the winter months and cold environments. Ideal for use in freezer or chiller rooms and unheated areas, inside or outside. Damaged steps, worn and holed floors, fitting guide rails, different levels, and spalled expansion joints.Use inside or out as low as minus 20°C Heavy duty, polyaspartic...
£175.44 (incl. VAT)
£146.20 (ex. VAT)
For essential concrete floor repairs during the winter months and cold environments. Ideal for use in freezer or chiller rooms and unheated areas, inside or outside. Damaged concrete pillars, sills, beams, render and stonework steps, worn and holed floors, fitting guide rails, different levels, and spalled expansion joints.Use inside or...
£145.80 (incl. VAT)
£121.50 (ex. VAT)
Rapid set concrete repair mortar for heavy wear, cold areas, that can be applied at 50mm thick at -20°C. Ideal for use in cold stores, securing railings, poles and posts, roads and manhole frames, etc.Easy to use – just add water, mix, and apply Starts to harden in 10 minutes, fully hard in five hours when suitably insulated (at -10°C)...
£107.82 (incl. VAT)
£89.85 (ex. VAT)
Watco Concrex Acid Strength is a high strength epoxy resin mortar with outstanding chemical resistance for heavy duty repairs to masonry and concrete floors. It has been developed to give outstanding chemical resistance, against even 95% sulphuric acid. It offers all the strength, ease of use and durability of Concrex, but is ideal for areas...
£175.44 (incl. VAT)
£146.20 (ex. VAT)
Concrex Fine Filler is an easy to use paste for repairing minor imperfections in floors before painting.Gives a painted floor a professional finish Fast drying permanent repairs Heavy duty epoxy resin repairs Rapid drying ready for paintingIncludes 1 x resin, 1 x curing agent, gloves, spreader, 2 x spatulas. For imperfections up to...
£68.10 (incl. VAT)
£56.75 (ex. VAT)
Mapei Mapefloor EP19 is a three-component epoxy mortar for thick repair layers on concrete surfaces subjected to high abrasion, and to form coatings with high wear resistance for concrete floors subjected to heavy traffic.For professional use only Hardens without remarkable shrinkage to form a very strong product with particularly high...
£105.84 (incl. VAT)
£88.20 (ex. VAT)
Solvent free two component Methyl Methacrylate (MMA) resin repair mortars with very high compressive strength for use with Acrydur flooring systems. Acrydur RM01 in combination with Acrydur RM02 is used for indoor projects for highly stress resistant repairs at 6 mm thickness. Acrydur RM01 in combination with Acrydur RM03 is used in the same...
£74.05 (incl. VAT)
£61.71 (ex. VAT)
A solvent free Methyl Methacrylate (MMA) resin coving paste to create high strength coving and skirtings for indoor applications with Acrydur flooring systems.Recommended for use as a high-strength coving for Acrydur flooring systems Can form coving up to 20mm thickness Hard wearing Excellent bond to substrate Easy to applyMore...
£462.14 (incl. VAT)
£385.11 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
