Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 33 products.
Active filters
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature.Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
£63.04 (incl. VAT)
£52.53 (ex. VAT)
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments.Recommended as a high-build, intermediate coat in high performance coating systems where fast handling and short overcoating times are required Meets the...
£226.80 (incl. VAT)
£189.00 (ex. VAT)
Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment.Recommended as a heavy duty coating for areas exposed to abrasion and aggressive corrosive climate such as ramps, ship hulls and holds of bulk...
£297.97 (incl. VAT)
£248.31 (ex. VAT)
Hempadur Multi-Strength 45703 is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating.Recommended as a primer for multi-strength systems for immersion and splash-zone service For airless spray application Colour swatch is a representation and not...
£332.35 (incl. VAT)
£276.96 (ex. VAT)
Hempadur MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Has a high load of MIO-pigment.For professional use only For use as an intermediate or finishing coat in epoxy systems in atmospheric exposure Service temperature: up to...
£67.63 (incl. VAT)
£56.36 (ex. VAT)
2-pack Epoxy finish with 6,700+ colour options for solid colours and single-layer metallic finishes. Suitable for use on Steel surfaces primed with Selemix Epoxy PrimersSuitable for the coating of equipment and machinery, especially those in an aggressive environment Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC...
£295.16 (incl. VAT)
£245.97 (ex. VAT)
Fast-curing 2-pack epoxy finish with 6,700+ colour options for solid colours and single-layer metallic finishes. For steel surfaces primed with Selemix Epoxy PrimersSuitable for the coating of equipment and machinery, especially those in an aggressive environment Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours...
£298.57 (incl. VAT)
£248.81 (ex. VAT)
2-pack epoxy matt finish with 6,700+ colours for use on steel surfaces primed with Selemix Epoxy Primers. Suitable for the coating of equipment and machinery, especially those in an aggressive environment.Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours*Note: RAL Pearl colours shown are approximations only -...
£562.42 (incl. VAT)
£468.68 (ex. VAT)
Fast-curing 2-pack epoxy matt finish with 6,700+ colour options for use on steel surfaces primed with Selemix Epoxy Primers.Suitable for the coating of equipment and machinery, especially those in an aggressive environment Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours*Note: RAL Pearl colours shown are...
£565.85 (incl. VAT)
£471.54 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
