Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 9 products.
Active filters
SigmaShield 400, formerley known as Amerlock 400 GF, is a two-component, high solids polyamine adduct cured epoxy coating, designed to prevent corrosion under insulation (CUI) of carbon steel and stainless steel. Glass flake reinforced for improved impact and abrasion resistance.Pass cryogenic cyclic test from -196°C (-321°F) to 200°C...
£453.00 (incl. VAT)
£377.50 (ex. VAT)
SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...
£73.93 (incl. VAT)
£61.61 (ex. VAT)
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
£64.51 (incl. VAT)
£53.76 (ex. VAT)
SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new...
£268.18 (incl. VAT)
£223.48 (ex. VAT)
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
£65.23 (incl. VAT)
£54.36 (ex. VAT)
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel.Can be used in systems for atmospheric or water-immersed...
£333.41 (incl. VAT)
£277.84 (ex. VAT)
PPG SigmaCover 805 is a two-component, high solids polyamine adduct cured epoxy coating for direct application to metal for excellent corrosion resistance and outstanding resistance to water and seawater.Very good surface wetting - Resistant to well-designed/controlled cathodic protection Good resistance against chemically polluted water...
£352.39 (incl. VAT)
£293.66 (ex. VAT)
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
£68.57 (incl. VAT)
£57.14 (ex. VAT)
PPG SigmaGuard 603 is a two-component, solvent-free, amine-cured epoxy coating.One-coat protection for maintenance or major refurbishment of ballast water tanks and crude oil tanks Tolerant to marginal surface preparation Good corrosion resistance Can be applied by heavy-duty, single-feed, airless spray equipment (60:1) Reduced...
£474.74 (incl. VAT)
£395.62 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
