Need Help?

Expansion Joints

Our range of expansion joints are made from fireproof sponge that cars instead of burning, helping prevent fire from spreading through a space. Use these expansion joints between materials in fire walls, ceilings and barriers that are prone to movement, expanding and contracting without compromising a fire barrier.

Gap seals and sponges can also be used around air ducts and ventilation to prevent vibrations, as well as between joists and squeaking floorboards for acoustic and fire protection.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 5 products.

Sort by:

Showing 1-5 of 5 item(s)

Nullifire FJ240 Spanatherm

Nullifire (Firetherm) FJ240 Spanatherm, fire resistant rock fibre expansion joints for slab edging and curtain walling, preventing the spread of smoke and fire. Up to 2 hours fire integrity Vapour and smoke barrier Allows significant movement accommodation 1200 x 600 x 100mm slabs Please contact our technical team on 01132455450 for...

£35.26

Shop now

In stock

Nullifire FJ400 Intuspan

Nullifire (Firetherm) FJ400 Intuspan, a very pliable intumescent expansion joint with a high level of movement that is suitable for gaps up to 100 mm, providing up to 2 hours fire protection with no adhesive required. Can accommodate regular cycles of high or low amplitude movement Tolerates very large movements Unaffected by moisture...

£10.76

Shop now

In stock

Tenmat FF108 Linear Gap Seals

Tenmat’s FF108 Linear Gap Seals are fully intumescent linear firestop seals tested to the latest EN Standards. The durable seals are installed under compression and can accept up to 50% movement. Equally suited to both vertical and horizontal joints, the seals offer up to 4 hour (EI240) fire rating for joints in fire rated walls and floors....

£3.15

Shop now

In stock

Astroflame Intumescent Expansion Joint/Linear Gap Seals

Astroflame Intumescent Expansion Joint/Linear Gap Seals, an elastomeric foam laminated with a graphite-based, intumescent compound on both sides. Designed to perform as a fire barrier in construction movement joints, when tested to BS 476 Part 20: 1987. Designed for long linear joint installations in both horizontal and vertical applications...

£2.91

Shop now

In stock

FSi Stopseal LGS Intumescent Linear Seal

FSi Stopseal LGS Intumescent Linear Seal is an intumescent thermoplastic filled with flame retardants and binders which provide a high performance volume expansion and pressure seal situated in an elastomeric, acoustic rated foam which allows for high movement. Very fast installation, simply friction fit Highly flexible, making install...

£73.80

Shop now

In stock