Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
See further below for representations of available translucent wood stains - these are shown in the colour picker as solid colours
Certificate Application
Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard is a coloured intumescent paint system for interior plasterboard and cement board ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat)...
Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 120 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
Exterior-use metal paints from manufacturers including Rust-Oleum, Mathys, Coo-Var, Teamac, Jotun, Everbuild, Solignum, International, Sherwin-Williams, Cromadex, and Sika, are designed for commercial and industrial applications. Providing long-lasting weather and UV protection, rust and corrosion resistance, superb colour retention - even in submerged environments - and high-temperature resistance, the selection of high-end direct-to-metal paints and coatings listed below are ideal for the marine sector, power and industrial processing plants, factory and warehouse use, offshore builds and locations, plus much more. For in-depth product specification and application information, please refer to product data sheets, or contact a member of our Technical Support team.
Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes:
Apply to bare, manually derusted or ready primed mild steel
Over 400 colour options including RAL, BS & NCS
Primer and metal topcoat in one
Interior/exterior use
Sag resistant - leaves no brush/roller strokes
Please...
Rust-Oleum CombiColor Multi-Surface is a solvent-based, adhesive primer and topcoat in one. Based on an alkyd binder it provides good adhesion to many types of substrates and is lead and chromate free.
For internal/external use
Quick drying
Direct application to many surfaces, including wood, metal*, mdf, masonry, tiles, most plastics,...
Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it...
Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 20 years of protection with excellent waterproofing and elasticity.
Primer and topcoat in one
16 colours available
Impact resistant
Prevents rust from spreading
UV resistant and protects against...
Rust-Oleum Mathys Noxyde Pegarust is a rust preventing coating that is the solvent-based version of Rust-Oleum Mathys Noxyde that can be applied by brush, roller or spray in cold temperatures down to 0°C or on damp surfaces by brush, roller or spray.
Excellent corrosion protection and waterproofing
Approved for corrosion class C5-M...
Teamac Anti-Corrosive Finish QD , A quick drying, anti-corrosive primer and finish in one formulated for direct application to prepared steel and cast iron.
Advantages
Quick drying coating
ideal for structural steel and metal fabrications.
Click to jump down to Technical Data
Coverage Calculator
**Available for delivery - see...
Coo-Var Hammercote Hammered Finish is a premium quality durable coating which provides a glossy hammered finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly...
Coo-Var Hammercote Smooth Enamel is a premium quality durable coating which provides a glossy smooth finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly...
Coo-Var Hammercote Smooth Aerosol is a premium quality durable coating which provides a glossy smooth finish in a handy 400ml aerosol. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use....
Teamac Metalastic Metal Protective Paint Colours, is high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours.
Advantages
Multi-surface
Gloss finish
Indoor or outdoor
Economical protection
Click...
Teamac Farm Oxide Paint , is an economical, general purpose, versatile product giving economical protection and decoration which can be used for the maintenance of structural steel, cladding etc. when applied to properly prepared surfaces.
Advantages
May be used coat on coat and dries to a durable gloss finish
Can be applied directly...
A ready-mixed maintenance paint for metal and other surfaces which adheres to the surface to which it is applied to form an impervious film which can withstand adverse climatic conditions.
Coverage Calculator
**Available for delivery - see Delivery Options below**
There are specialist coatings listed which are designed to deliver a specific colour finish, such as a hammered gold finish, along with others such as Rust-Oleum CombiColor, which are available in almost the full range of RAL and British Standard (BS) colours. If you are unable to find a specific colour, please contact us and we may be able to assist you in colour matching a new coating to existing surface and substrate coatings.