Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Exterior-use metal paints from manufacturers including Rust-Oleum, Mathys, Coo-Var, Teamac, Jotun, Everbuild, Solignum, International, Sherwin-Williams, Cromadex, and Sika, are designed for commercial and industrial applications. Providing long-lasting weather and UV protection, rust and corrosion resistance, superb colour retention - even in submerged environments - and high-temperature resistance, the selection of high-end direct-to-metal paints and coatings listed below are ideal for the marine sector, power and industrial processing plants, factory and warehouse use, offshore builds and locations, plus much more. For in-depth product specification and application information, please refer to product data sheets, or contact a member of our Technical Support team.
There are 32 products.
Active filters
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. This high build product is fast drying and can be used direct to metal.Ideal as a primer/topcoat in atmospheric environments Can be applied at sub zero surface temperatures Available in hundreds of RAL, NCS, BS and Jotun Colours - 1,100+ new...
£59.33 (incl. VAT)
£49.44 (ex. VAT)
Jotun Conseal Touch-Up Alu is a one component physically drying acrylic coating with a matt finish for suitably prepared steel and coated surfaces. This version of Jotun Conseal Touch-Up is aluminium pigmented for improved barrier effect.High build product Fast drying - the product is touch dry after approx. 20 minutes at 23°C Can be...
£61.70 (incl. VAT)
£51.42 (ex. VAT)
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
£81.30 (incl. VAT)
£67.75 (ex. VAT)
Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
£349.68 (incl. VAT)
£291.40 (ex. VAT)
Jotun Jotamastic 80 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product.Specially designed for areas where optimum surface preparation is not possible or desired Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments Also...
£71.35 (incl. VAT)
£59.46 (ex. VAT)
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating.Surface tolerant High solids product Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired Also available in Aluminium for improved...
£77.56 (incl. VAT)
£64.63 (ex. VAT)
Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Coverage Calculator More...
£66.68 (incl. VAT)
£55.57 (ex. VAT)
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures. Coverage...
£66.01 (incl. VAT)
£55.01 (ex. VAT)
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and...
£281.58 (incl. VAT)
£234.65 (ex. VAT)
Jotun Jotamastic 87 WG is a `Wintergrade` version of Jotamastic 87 to aid application in lower temperatures and provide faster cure and dry times.Two component epoxy mastic coating for repair and maintenance. Surface tolerant High solids High build product Specially designed for areas where optimum surface preparation is not possible...
£70.94 (incl. VAT)
£59.12 (ex. VAT)
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired.Provides long lasting protection...
£63.66 (incl. VAT)
£53.05 (ex. VAT)
Jotun Jotamastic 90 GF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It is reinforced with glass flakes for improved abrasion and scratch resistance. Specially designed for areas where optimum surface preparation is not possible or desired.Now available...
£289.88 (incl. VAT)
£241.57 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are specialist coatings listed which are designed to deliver a specific colour finish, such as a hammered gold finish, along with others such as Rust-Oleum CombiColor, which are available in almost the full range of RAL and British Standard (BS) colours. If you are unable to find a specific colour, please contact us and we may be able to assist you in colour matching a new coating to existing surface and substrate coatings.
