Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding.
Available in 350+ colours
Expected system lifetime up to 15 years (depending on exposed...
Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Available in...
Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Biodegradable in general use...
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use.
Advantages
British gas reference BGC MO1.
Department of Transport Item NO:155.
ISO 9001:2008
ISO 140001:2004
1 x 1l available...
Thermoguard Thermoproof Exterior Fluid is a penetrating fire proof fluid for bare wood such as sleepers, fencing, cladding and decking. The weather resistant, water-based, non flammable formula enables safe application by untrained and inexperienced users.
Coverage Calculator
Envirograf HW02E Clear Intumescent Coating upgrades the fire resistance of new and certain already coated timber and wood related surfaces.
Advantages
For internal/external use
BS Class 0 & Class 1 and up to 60 mins fire resistance on suitable surfaces and substrates
To be used as part of a full Envirograf intumescent system...
Envirograf HW01 is a white, intumescent coating for wood.
Advantages:
BS Class 0 & Class 1 protection
30 & 60 mins’ fire resistance
White finish for upgrading new or previously coated wood & timber
Water-based for internal/external use
Should be used as part of a complete Envirograf system
Envirograf HWAP/WB Primer is a clear water based primer:
For use under Envirograf HW01 and HW02E Intumescent coatings
Can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate
Application by brush or roller
Envirograf ES/VFR is a Clear Fire Protection Coating for wood and timber.
ADVANTAGES
British Standard Class 0 & 1 and EU standard B/s1/d0
Water-based for internal/external use
Can be used as part of an economically priced Envirograf system
Easy and safe to apply
Delivers long-term protection and fire resistance
Also available in a...
Envirograf ES/VFR White Fire Protection Coating is a white coloured, water based fire retardant coating for wood, and certain wood-related products:
Suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0
Hard wearing for internal and external use
Must always be finished...
Thermoguard Flame Retardant Anti-Graffiti Clear Glaze is an exceptionally smooth, hard and impermeable clear two-pack flame retardant coating for internal and external use. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide...
Thermoguard Timbercoat is a durable fire protection paint for interior and exterior timber surfaces:
Meets new Fire Regulations standard:
BS EN Class B s1 d0, BS Class 1
Class O Surface Spread of Flame
Can also achieve 30 & 60 minutes Fire Resistance in certain instances
Expands to create a barrier, insulating wood from heat and...
Thermoguard Fire Retardant Varnish Overcoat (Exterior) is for use in combination with and over Thermoguard Fire Varnish Basecoat in external applications.
ADVANTAGES
For timber/timber derived substrates
Clear, UV and wear-resistant finish
Certificate of Supply available
Certificated when used over the basecoat:
BS EN Class B s2 d0...
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coats externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish Overcoat (Exterior) to complete the system.
Complete systems including...
Thermoguard Timbercoat 30 and 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke and Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in...
Thermoguard Timbercoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...
All of the intumescent paints we offer have been tested to varying British/European standards by recognised independent third parties depending on their required use and performance. In addition to these industry standard tests, some products also offer additional paperwork after use by way of a ‘certificate’ that can be obtained in different ways - manufacturer dependent. Some require a form to be completed and returned by email, others have online application forms, others can be simply called to provide project details verbally. Not ALL products offer this additional supplement and if this type of certificate is important to your project you should contact our Technical Team on 0113 2455450 (option 2) or [email protected] to advise them of this so they can ensure they recommend a suitable product accordingly. Certain larger projects may also require the involvement of an independent inspector, again you should contact our Technical Department to discuss this if required.
Our help and advice promise
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. Whether it’s structural steel in a warehouse, fire retardant paint for wood on a new-build, or the internal walls of a block of flats, we can provide a full specification and offer guidance throughout the project.
